Jump to content

New drag times with updated ECU *BONE STOCK RECORD!


  • Please log in to reply
100 replies to this topic

#1 HybridMT Posted 04 February 2009 - 10:26 PM

HybridMT
  • Members
  • R32 Member

  • PipPip
  • 333 posts
Well, the track conditions were horrible, so never got a chance to get an accurate run in RRR. Track surface was bitter cold tonight, so VDC would come on every time, even without launching. I ended up making a run in R R off and hit 11.347 @ 120.85 mph! This is in a bone stock GTR after the ecu update on stock dunlops, with pump gas and absolutely no weight reduction! With the new ECU update, launch revs to 3000 rpms instead of 4500, which did not seem at all harsh on the car. Take off was silky smooth with absolutely no wheel hop. I recommend all 09 GTR owners get the ECU update!

This was today at No Problem Raceway in Belle Rose, Louisiana, complete time slip below. Good job to Nissan for the update and very special thanks to Gary, GTR Master Tech at Price Leblanc Nissan, for the reflash this morning and coming to the track with me.

R/T .082
60' 1.690
330 4.742
1/8 7.282
mph 95.43
1000 9.479
1/4 11.347
MPH 120.85

I absolutely love this car! All you locals, see you at the next event! www.IMPORTFACEOFF.net

Posted Image

To any magazines who read this thread, feel free to call the track owner to verify my time. It was done at No Problem Raceway in Belle Rose, Louisiana on 2/4/09 @ 6:09 pm.

Pat Joffrion, No Problem Raceway owner
Ph: 985-369-3692
www.NoProblemRaceway.com

Also, Gary, the GTR Master Tech at Price Leblanc Nissan in Gonzales, Louisiana (ph: 225-743-8100) was also there and can verify I had the update that morning and was running on the stock dunlops.

I have time slip in hand and will get it scanned as soon as possible.   This time can be duplicated by any GTR under the same conditions.

Edited by HybridMT, 06 February 2009 - 11:31 AM.



2009 R35 GTR: 10.92 @ 129.9
www.ImportFaceOff.net

#2 MC Posted 04 February 2009 - 10:30 PM

MC
  • Administrator
  • NAGTROC CO-FOUNDER

  • PipPipPipPipPipPipPip
  • 13,755 posts
  • Location:NC
damn...  i knew  it would make a huge difference


1st Production Built 2012 GT-R Jet Black Black Edition #0659
1.57 60ft | 6.9@103 1/8th mile | 10.9@126 1/4 mile
MC's Youtube Channel

#3 toprpm Posted 04 February 2009 - 10:35 PM

toprpm
  • Members
  • R33 Member

  • PipPipPip
  • 832 posts
  • Location:UAE,ALAIN
Nice numbers

still waiting my dealer to get the update. for sure i will for it.

Nice pic too.  :biggrin:



#4 Chinaski Posted 04 February 2009 - 10:37 PM

Chinaski
  • Members
  • R34 Member

  • PipPipPipPip
  • 1,019 posts
  • Location:NY

View PostMC, on Feb 4 2009, 11:30 PM, said:

damn...  i knew  it would make a huge difference

Unfortunately it was done with VDC-off LC so that negates the purpose of the update. Hopefully during better conditions he can run again with a warranty-legal VDC-on LC and give us a time.



#5 Dave@GotboostPerformance Posted 04 February 2009 - 10:37 PM

Dave@GotboostPerformance
  • Vendors
  • SpecV Member

  • PipPipPipPipPipPip
  • 4,151 posts
  • Location:Oregon
Wow, that's impressive.

I wonder what you'd do with a Cobb AP re-flash

What build date is your car?


'09 GT-R titanium:
Follow My Build Here: http://www.nagtroc.o...he-gbp-900-kit/

Innovative GT-R products at their finest

Posted Image

www.gotboostperformance.com
dave@gotboostperformance.com
email and paypal

Posted Image

#6 FikseGTS Posted 04 February 2009 - 10:39 PM

FikseGTS
  • NAGTROC Certified Member
  • R34 Member

  • PipPipPipPip
  • 1,588 posts
  • Location:South Florida
sweeet!  1.69 short time with no launch control?


if you did this in RR off, then wouldn't that be using launch control?

edit:, what were your short times in RRR?

Edited by FikseGTS, 04 February 2009 - 10:42 PM.




#7 MC Posted 04 February 2009 - 10:42 PM

MC
  • Administrator
  • NAGTROC CO-FOUNDER

  • PipPipPipPipPipPipPip
  • 13,755 posts
  • Location:NC
no it still  holds the 3K rpm instead of the  4500  so its still the  new way.  only difference was  VDC  wont come on if it detects wheel spin  if it was warmer his time would have  been the same as its  only faster with VDC off when you get interference with VDC on. other than that the  two methiods work  identical


1st Production Built 2012 GT-R Jet Black Black Edition #0659
1.57 60ft | 6.9@103 1/8th mile | 10.9@126 1/4 mile
MC's Youtube Channel

#8 HybridMT Posted 04 February 2009 - 10:52 PM

HybridMT
  • Members
  • R32 Member

  • PipPip
  • 333 posts

View PostMC, on Feb 4 2009, 10:42 PM, said:

no it still holds the 3K rpm instead of the 4500 so its still the new way. only difference was VDC wont come on if it detects wheel spin if it was warmer his time would have been the same as its only faster with VDC off when you get interference with VDC on. other than that the two methiods work identical

That's exactly right. You get the same 3k clutch dump with VDC on or off, only difference is VDC will take away power if there is too much wheel spin, which everyone was having tonight. I'm confident similar times can be hit in RRR with better track conditions because VDC will not come on to cut power. When I launched under the sun this afternoon on the street in RRR, VDC never came on.

Edited by HybridMT, 05 February 2009 - 12:24 AM.



2009 R35 GTR: 10.92 @ 129.9
www.ImportFaceOff.net

#9 MC Posted 04 February 2009 - 11:15 PM

MC
  • Administrator
  • NAGTROC CO-FOUNDER

  • PipPipPipPipPipPipPip
  • 13,755 posts
  • Location:NC
also  did you notice if you  stomp it hard it goes to 3.5K  for a short period of time.    i bet you might even improve a little if you let off the  brake before it died down  to 3


its funny you posted about the  traction  about  a minute  before you posted i posted this:  


View PostMC, on Feb 5 2009, 12:15 AM, said:

ok guys i got some more findings for you and its a little dissapointing but not suprising.. here goes

so its 22 degrees tonight here and i thought with the cold air i would go out and see if i could knock a tenth or 2 off that 3.8 for us.... so i set up the car RRR manual and stomp it hard all the way to 3.5K and catch it befores it dies down. im off and the rear tires dont hook up on the cold pavement and VDC R goes crazy cutting my power and blowing the run. im like ok lets try it at 3K and same thing happens about a half second into the run.... out of a dozen or so of these attempts the last few days.... this was the first time VDC ever interfered with one of launches... but again its bitter cold here and traction issues are to be expected (tires were all 29PSI by the way) but i didnt think VDC R would have babysit as quick as it did

so for tonight its a scratch. this weekend its gonna be 60 so i'll try again.

but yeah atleast we learned tonight that it looks like nissan has the VDC to cut on at almost ANY wheel spin. so even when it warms up it might be better to launch at the 3K than the 3.5K and get VDC coming on



1st Production Built 2012 GT-R Jet Black Black Edition #0659
1.57 60ft | 6.9@103 1/8th mile | 10.9@126 1/4 mile
MC's Youtube Channel

#10 HybridMT Posted 04 February 2009 - 11:32 PM

HybridMT
  • Members
  • R32 Member

  • PipPip
  • 333 posts
never went up to 3500 for me


2009 R35 GTR: 10.92 @ 129.9
www.ImportFaceOff.net

#11 Dynomite Posted 04 February 2009 - 11:36 PM

Dynomite
  • Members
  • R32 Member

  • PipPip
  • 52 posts
  • Location:San Antonio, TX
1.69 60ft is incredible! My car spins in 1st all the way. I can't wait to get the update now. I wonder if the Dunlops are better than the Bridgstones for drag racing?

Edited by Dynomite, 04 February 2009 - 11:38 PM.



2009 GT-R Premium Blk/Blk Custom Cobb Stage 2, CBRD Y-Pipe, KN filters, GFB BOV
11.55 @ 121.75 Bone Stock LC1 55 degrees
11.72 @ 122.20 Bone Stock no LC1 60 degrees
11.02 @ 127.78 New Setup

#12 MC Posted 04 February 2009 - 11:36 PM

MC
  • Administrator
  • NAGTROC CO-FOUNDER

  • PipPipPipPipPipPipPip
  • 13,755 posts
  • Location:NC
oh yeah.? hmm   well next time you  get a chance.  stomp it like your gonna put a hole  in the floorboard and  see if it does.


1st Production Built 2012 GT-R Jet Black Black Edition #0659
1.57 60ft | 6.9@103 1/8th mile | 10.9@126 1/4 mile
MC's Youtube Channel

#13 HybridMT Posted 04 February 2009 - 11:39 PM

HybridMT
  • Members
  • R32 Member

  • PipPip
  • 333 posts
will do.

yes, the dunlops are stickier.


2009 R35 GTR: 10.92 @ 129.9
www.ImportFaceOff.net

#14 HybridMT Posted 05 February 2009 - 12:28 AM

HybridMT
  • Members
  • R32 Member

  • PipPip
  • 333 posts
I'd rather a 3k launch than 3500 though.  Easier launches are better for the car in the long run.


2009 R35 GTR: 10.92 @ 129.9
www.ImportFaceOff.net

#15 MC Posted 05 February 2009 - 01:01 AM

MC
  • Administrator
  • NAGTROC CO-FOUNDER

  • PipPipPipPipPipPipPip
  • 13,755 posts
  • Location:NC
oh yeah  i agree  i wouldnt  do it everytime  im just  curious if it affects your 1/4 at all mainly  the  60ft


1st Production Built 2012 GT-R Jet Black Black Edition #0659
1.57 60ft | 6.9@103 1/8th mile | 10.9@126 1/4 mile
MC's Youtube Channel

#16 Silver Surfer Posted 05 February 2009 - 01:17 AM

Silver Surfer
  • Members
  • R32 Member

  • PipPip
  • 270 posts
Nice run!!

http://www.wallacera...60_equation.php


0-60mph= 2.88 seconds! WOW!! GT-R seems to like the Dunlops more than the Bridestones at the track, and at the strip.



#17 HybridMT Posted 05 February 2009 - 01:25 AM

HybridMT
  • Members
  • R32 Member

  • PipPip
  • 333 posts
/\ damn!  Funny link too as my last name is WALLACE.

After the pass said to myself, that felt like an 11.5, maybe even an 11.4! LOL

Edited by HybridMT, 05 February 2009 - 01:30 AM.



2009 R35 GTR: 10.92 @ 129.9
www.ImportFaceOff.net

#18 HybridMT Posted 05 February 2009 - 01:28 AM

HybridMT
  • Members
  • R32 Member

  • PipPip
  • 333 posts
oh yeh, the pass was done in AUTO


2009 R35 GTR: 10.92 @ 129.9
www.ImportFaceOff.net

#19 GODZILLA_GTR Posted 05 February 2009 - 03:18 AM

GODZILLA_GTR
  • Supporter
  • R34 Member

  • PipPipPipPip
  • 1,199 posts
  • Location:SoCal
:rolf2:  :rolf2:  :biggrin: very amazing run.  you were the one that got 11.6 without LC as well. your GTR is very special my friend. lets see what others will get at the strip with the new update.


2009 Ivory Pearl GTR:
Performance - Swift Springs, Harman Motive DPs, COBB catted midpipe, Titek Ti Street exhaust, HKS spark plugs, COBB SF intakes, COBB AP006, Tuned by SPE (521 AWHP/519 ft-lb Torque).

Wheels/Stoppers - BBS LM DBK (Kics spacers: 15mm & 25mm, BBS RED lug nuts), Stoptech SS brake lines, Stoptech brake pads,
painted calipers (fire truck red)

Exterior/Interior - Kansai Service CF front lip w/brake ducts, Rexpeed CF side skirts, Rexpeed CF trunk spoiler, Wald CF wing cover, Seibon CF hood, Seibon CF rear valence, Difflow rear diffuser (4 element), Rexpeed CF naca ducts, Rexpeed CF bottom mirror covers, Titek CF antenna cover, Front GT-RR LED clear side markers, Rear MCR LED red side markers, Nissan Daytime LED running lights, V-LEDS inside & out, Adrey's video aux & bypass kit.


Items for Sale:

-SEIBON DV-style Carbon Fiber Hood
http://www.gtrlife.com/forums/topic/83375-fs-seibon-dv-style-carbon-fiber-hood/

#20 jaspergtr Posted 05 February 2009 - 07:30 AM

jaspergtr
  • NAGTROC Certified Member
  • Egoist Member

  • PipPipPipPipPipPipPip
  • 5,379 posts
  • Location:Fayetteville, NC
hybrid - nice job!  

was wondering if you could try it in 'r'?

basically, i found out (from watching my wife get an 11.4) that my track sucks for traction...  you appear to be setting the bar for stock gt-r's.  your data is always appreciated - looks like fun too... :biggrin:


GTM Street Mid-pipe
AP slotted rotors (Fr)
Cosworth Trackmaster Pads
SFS Matte CF Wing
Rexpeed Front Lip


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users