Jump to content

- - - - -

Boulder Nissan GTR - P800 to Flex Fuel E1K Build - Dyno Results & Video Inside!

P800 GTR Flex Fuel E1K Nissan GTR

244 replies to this topic

#1 Neil Switzer Posted 13 January 2012 - 04:53 PM

Neil Switzer
  • International Vendor
  • SPI Performance Consultant

  • PipPipPipPipPip
  • 2,852 posts
  • Location:Oberlin, Ohio
Hello Everyone,

With this spring's events just around the corner, I thought it was time that we let the proverbial cat out of the bag, Boulder Nissan's jaw dropping P800 GTR is here for upgrades, and not just a minor re-tune, it is in for a complete conversion to our Flex Fuel E1K package.

Posted Image

The full build sheet:

Switzer Flex Fuel E1K GTR PKG
- Switzer Hybrid Standalone Engine Management System
- Switzer Flex Fuel System
- Switzer E1K Fuel Injector Kit
- Switzer Monster Intercooler Kit
- Switzer E1K Turbochargers and Manifold Assembly (req's good cores)
- Switzer E1K External Wastegate Assembly
- COBB AccessPORT W/TCM Capability (NIS-006)
- Switzer E1K Calibration for COBB AP
- Switzer MAF/Intake and Filter Assembly
- Switzer High-Flow E1K Intakes for Switzer MAF
- Switzer E1K Catless Off-Road Test Pipes
- Switzer E1K Fuel System Upgrades
- Lightweight 90mm Stainless Full Exhaust
- Switzer Cooling Package

Switzer Stage 4 Transmission Upgrade by ShepTrans, Exclusive transmission builder of Switzer Performance
- PPG 6 GEAR SET
- SWITZER-SPEC CLUTCH
- FWD RETAINER
- MECHANICAL LOCK #1
- MECHANICAL LOCK #2
- O-RING AND SEAL UPGRADE KIT
- OIL PUMP SHAFT UPGRADE WITH BLUEPRINT
- 6 NEODYMIUM MAGNETS
- HIGH TEMP REAR DIFFERENTIAL OIL SEAL
- STAINLESS REUSABLE INTERNAL FILTER
- R35 GTR TRANSMISSION COOLER
- GR6 TRANSMISSION FLUID

Switzer Stage 1 VR38DETT Engine Build
- SWITZER SPEC MAHLE PISTONS, PINS, AND RINGS
- SWITZER SPEC CARILLO CONNECTING RODS
- SWITZER SPEC CAMSHAFTS
- SWITZER BLUEPRINTED ENGINE AND OIL PUMP
- SWITZER SPEC NISSAN ENGINE COMPONENTS

Stay tuned as I update this thread!

Edited by Neil Switzer, 01 March 2012 - 09:02 AM.




#2 max_R35 Posted 13 January 2012 - 04:56 PM

max_R35
  • ME MODERATOR
  • R34 Member

  • PipPipPipPip
  • 1,788 posts
  • Location:UAE-AD
Can't wait for more pics and results

This car is truly stunning


1st Series II Gulf Spec GT-R Black, Black/Red

Engine/Drivetrain:
Cobb AP-NIS-006, Custom Dyno Tune: Ben @ GTC, GTC 4" Ti Exhaust, GTC Turbo Inlet Pipe, GTC 80mm Intake, AMS catless DP, AMS Intercooler, Injector Dynamics 1000cc Injectors, HKS spark plugs, HKS Actuators, Cobb Silicon Hoses, Cobb XLE BPV, GBP SD Kit B, SIR 265LPH pumps, Castrol Engine Oil, Dodson Transmission and Diff Fluid, Willall Transmission Cooler + Sump, Willall Engine Sump, Willall Diff Coolers, AAM Engine Oil Cooler, CBRD Radiator, Carbing Coolant Overflow Tank, Samco Radiator Hoses, Dodson 60C Thermostat, Dodson Sportsman Kit + Extras, Michelin PSS 295/35/20 Square

Visual:
Stillen Front License Plate Bracket, Yoshi/RevoZport DN Duckbill CF Trunk, GT-RR CF Steering Wheel, Fringe XVO Afterburner tips, SMS Design & Performance Spec Mi CF Engine Cover # 9of10, Carbon Dry AC surround and door handles, Rexpeed Mirrors, Emblems, Carbon Side Emblem Cover and Carbon Hood Dampers, Matte Black VR G2 F20x10 R20x11

View PostAMS, on May 18 2010, 04:52 PM, said:

We rarely are the first to market on the product but in our eyes we always produce the best product when we do finally release it :)

#3 timsanders Posted 13 January 2012 - 04:58 PM

timsanders
  • Members
  • THAT GUY

  • PipPipPipPipPipPip
  • 4,653 posts
  • Location:Blue Water and White Sandy Beaches
Alright Jason big congrat's :cheers:


Posted Image


#4 BPAuto2 Posted 13 January 2012 - 05:01 PM

BPAuto2
  • Premier International Vendor
  • SpecV Member

  • PipPipPipPipPipPip
  • 4,122 posts
  • Location:Los Angeles, CA
Jason always does things right!! :thumbsup:


Posted Image

...[a Bespoke Venture]...t. 213.745.6954 | sales@gt-rr.com Official North American Distributor: Top Secret, Amuse, Mines... Add us on Facebook!


Please check out our exclusive price-match tool HERE that not only matches the competition, but gives you a 2% return just for using it.


#5 Jiaim Posted 13 January 2012 - 05:03 PM

Jiaim
  • Members
  • Enthusiast

  • PipPipPip
  • 722 posts
  • Location:France
Time for a full build journal with detailled pics cause we have never seen yet any r1k setup. We have seen a lot of detailed pics of ams alpha setups and near to nothing from switzers.



#6 MadeInSweden Posted 13 January 2012 - 05:06 PM

MadeInSweden
  • Members
  • R33 Member

  • PipPipPip
  • 963 posts
  • Location:Sweden
That is one MEAN looking car :) I want this kit aswell!


12' GT-R black edition
13' BMW F31 330D M
94' Supra MKIV - SOLD :(

http://fbcdn-sphotos...992123356_n.jpg

#7 Gigjam Posted 13 January 2012 - 05:15 PM

Gigjam
  • Members
  • R33 Member

  • PipPipPip
  • 757 posts
  • Location:Irvine, CA
What are the wheels on the red GT-R in the background??


Posted Image


#8 Saftsoppa Posted 13 January 2012 - 05:47 PM

Saftsoppa
  • Members
  • NAGTROC Newbie

  • Pip
  • 36 posts
  • Location:Ostersund
Oh my god that is a sexxy machine. The best looking GT-R i have ever seen.
• What is the name of the frontbumber + lip?
• What kind of rims are that?


I've got soul - but i'm not a soldier

#9 rsfootball Posted 13 January 2012 - 05:51 PM

rsfootball
  • Members
  • R35 Member

  • PipPipPipPipPip
  • 2,047 posts
  • Location:Las Vegas, NV
Congrats Jason


2009 Nissan GTR Blk/Blk Premium-Delivered July 31 2008
(SP Engineering w/GReddy USA)SPE GODZILLA PKG+
GReddy Turbo Kit /SPE Modified Billet Turbos , 4.3L GReddy Stroker Kit
Big Thanks to Volk, WPC, Dodson, KW Suspension, & to a special machine shop in Japan.

Very slow 1/4mile times. Praying to go faster...

#10 Djreversal Posted 13 January 2012 - 05:58 PM

Djreversal
  • Members
  • SpecV Member

  • PipPipPipPipPipPip
  • 3,174 posts
  • Location:Long Island, NY
very hot.. my favorite hood ever and it painted looks incredible.


2009 GT-R Gunmetal Premium

Boost Logic 4.1L Stroker Block
Headgames Fully Built / Ported heads with Kelford B-Series Cams
Boost Logic Turbo Kit (Twin Precisions 5858 CEA .82 A/R Billet DBB Turbos, Wastegates vented to atmosphere)
AAM Tripple Intank E-85 Fuel System
Cobb ECU (Tuned by Sean Ivey @ IveyTune)
Stillen Sway Bars
KW Varient 3 Coil Overs
Boost Logic FMIC With Wrinkle Black - Hard Piping & Tial BOV's
Wingless
Volk TE37-SL 315R NT05R AND 305F NT555R
Shep Stage 2.5 Transmission
T1 Transmission Brace
1104 whp / 950 trq - E85 (Tuned By Sean Ivey @ IveyTune)

Coming Soon ---

8 second 1/4 mile :)

Posted Image


http://youtu.be/PTcrO67hSdM

#11 Jason@BoulderNissan Posted 13 January 2012 - 06:30 PM

Jason@BoulderNissan
  • Dealers
  • SpecV Member

  • PipPipPipPipPipPip
  • 3,491 posts
  • Location:BOULDER, CO
Thanks for starting a build thread Neil :)

Thanks for the kind words everyone. I am really excited!!



#12 Tal@ACGAutomotive Posted 13 January 2012 - 06:38 PM

Tal@ACGAutomotive
  • Vendors
  • ACG Automotive

  • PipPipPipPipPip
  • 2,372 posts
  • Location:San Diego, CA
Big time Jason!  Hopefully get to see this beast when I pick mine up.

You may owe me a trip around the block ;)


Posted Image

San Diego's GT-R Aftermarket and Service Center

7884 Ronson Road | San Diego, CA 92111 | 877-422-4736 x 2 | www.acgautomotive.com | tal@acgautomotive.com

AMS ALPHA Preferred Authorized Installation Facility in Southern California

- AMS | Akrapovic | iPE | HKS | COBB | | Meisterschaft | Amuse | Aeromotions | WALD International | Zele | Password:JDM | Technocraft | C-West -
- ADV1 | HRE | BBS | Forgestar | Klassen | DPE | KW | JRZ | Volk | Advan | AP Racing | Alcon | Brembo | Endless | AutoTecknic -


#13 Scuba_Steve Posted 13 January 2012 - 07:01 PM

Scuba_Steve
  • NAGTROC Certified Member
  • R34 Member

  • PipPipPipPip
  • 1,085 posts
  • Location:Fountain, CO

View PostJason@BoulderNissan, on 13 January 2012 - 06:30 PM, said:

Thanks for starting a build thread Neil :)

Thanks for the kind words everyone. I am really excited!!

Well I guess the cat's out of the bag :thumbsup: .  Can't wait to go for a ride!



#14 Jason@BoulderNissan Posted 13 January 2012 - 08:42 PM

Jason@BoulderNissan
  • Dealers
  • SpecV Member

  • PipPipPipPipPipPip
  • 3,491 posts
  • Location:BOULDER, CO

View PostSaftsoppa, on 13 January 2012 - 05:47 PM, said:

Oh my god that is a sexxy machine. The best looking GT-R i have ever seen.
• What is the name of the frontbumber + lip?
• What kind of rims are that?

Thanks. The front bumper and hood are made by Top Racing and the wheels are ADV 10's.

View Posttgoss, on 13 January 2012 - 06:38 PM, said:

Big time Jason!  Hopefully get to see this beast when I pick mine up.

You may owe me a trip around the block ;)

Thanks. We can definitely take it out for a drive.


View PostScuba_Steve, on 13 January 2012 - 07:01 PM, said:



Well I guess the cat's out of the bag :thumbsup: .  Can't wait to go for a ride!

We will have to run some laps at HPR and VBOX a few 60-130 pulls.


Thanks again everyone. I am really excited to get the car back and get some seat time :)






#15 VEGASGTR Posted 13 January 2012 - 11:53 PM

VEGASGTR
  • Members
  • Egoist Member

  • PipPipPipPipPipPipPip
  • 8,272 posts
  • Location:LAS VEGAS
damn.. my favorite looking GTR just grew some serious balls!!

Congrats Jason! great build for a great guy!

Is this a manifold setup? or still using Stock manifold? wondering what the difference is between E900 and E1K

Edited by VEGASGTR, 13 January 2012 - 11:56 PM.



current: 2014 Z51 A&A supercharged 608whp on 91.


past:
2009 GTR 9.5@150 4.38 60-130
2006 S/C Z06
2002 Twin Turbo Z06

#16 vtknight Posted 14 January 2012 - 12:28 AM

vtknight
  • NAGTROC Certified Member
  • R35 Member

  • PipPipPipPipPip
  • 2,819 posts
Wow Jason - that is an amazing looking machine...although the P800 is a serious upgrade, the E1K is just stupid fast. As always you are in great hands with Switzer!

Like everyone else - I can't wait for the pictures and videos - along with some 60-130 and 1/4 mile pulls...

Congratulations!

:cheers:



#17 Dave@GotboostPerformance Posted 14 January 2012 - 12:47 AM

Dave@GotboostPerformance
  • Vendors
  • SpecV Member

  • PipPipPipPipPipPip
  • 4,497 posts
  • Location:Sherwood, Oregon

View PostVEGASGTR, on 13 January 2012 - 11:53 PM, said:

damn.. my favorite looking GTR just grew some serious balls!!

Congrats Jason! great build for a great guy!

Is this a manifold setup? or still using Stock manifold? wondering what the difference is between E900 and E1K

Love this car too Sam.

Jason's car rocks!

Edited by Dave@GotboostPerformance, 14 January 2012 - 12:48 AM.



'09 GT-R titanium:
Follow My Build Here: http://www.nagtroc.o...he-gbp-900-kit/

Innovative GT-R products at their finest

Posted Image

www.gotboostperformance.com
dave@gotboostperformance.com
email and paypal

Posted Image

#18 Shipwreck Posted 14 January 2012 - 05:19 AM

Shipwreck
  • Members
  • driving big boats

  • PipPip
  • 442 posts
  • Location:Houston, TX
Awesome! Subscribed to this! Dreaming of future upgrades.


'09 Super Silver GT-R || Switzer P800

#19 Skyliner Posted 14 January 2012 - 05:29 AM

Skyliner
  • Members
  • Egoist Member

  • PipPipPipPipPipPipPip
  • 6,553 posts
  • Location:Greece
I want one of these as well!



#20 Jason@BoulderNissan Posted 14 January 2012 - 08:31 AM

Jason@BoulderNissan
  • Dealers
  • SpecV Member

  • PipPipPipPipPipPip
  • 3,491 posts
  • Location:BOULDER, CO
Thanks guys.

Sam,
The E1K runs their cast stainless manifolds. Hopefully Neil can chime in with the additional differences between the two packages.

Thanks again everyone.





Reply to this topic



  

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users