Jump to content

600$ - FS: 2012 Bell-Housing BRAND NEW

17 replies to this topic

#1 Mike2 Posted 23 January 2012 - 05:08 PM

  • Location:Farmingdale, NY
Brand new, straight from Nissan, is a 2012 GT-R bell housing. This revision was made to fix up the "chattering" issue so many people have talked about.

600 shipped

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Edited by Mike@TopLevel, 28 February 2012 - 10:42 AM.

#2 Mike2 Posted 28 February 2012 - 10:41 AM

  • Location:Farmingdale, NY

#3 mishkinm5 Posted 29 March 2012 - 09:24 PM

  • Location:Skokie, IL
Is this still available?

2009 GT-R

AMS Alpha 9

#4 Mike2 Posted 30 March 2012 - 08:52 AM

  • Location:Farmingdale, NY
Yes sir!

#5 NJNYCGTR Posted 30 March 2012 - 08:14 PM

  • Location:NJ/NYC
will this bolt up to any year transmission?
Are there any benefits other then the reduced "chatter"?


#6 nico Posted 30 March 2012 - 09:03 PM

  • Location:Southern California
same question as above - will it fit pre 2012 models?

2010 GT-R
AAM GT900-R turbos, built motor, shep stage 3 trans
tuned by 5150 Racing
Special thanks to: Jon Drenas, Sean Morris, Ben Linney, AMS, Eugene @ SPE, ACG, Sheptrans, Sam (VEGASGTR), Christian (Dv8), and all others who have helped me throughout the way

#7 mishkinm5 Posted 30 March 2012 - 09:05 PM

  • Location:Skokie, IL
Pm me best price shipped to 60076.

2009 GT-R

AMS Alpha 9

#8 Mike2 Posted 03 April 2012 - 10:49 AM

  • Location:Farmingdale, NY
Yes, this will fit all pre 2012 models. Just that it's new and if you're out of warranty and want to rid yourself of the chatter, this is a big money saver.

#9 RSiR Posted 25 June 2012 - 09:44 PM

Would the 2012 bell housing bolt on to my 2008 GTR engine?  Thanks if so u mail oversea?

#10 MF92 Posted 26 June 2012 - 02:26 PM

  • Location:Toronto, Canada
guys, the GTR has a 5 year warranty for the bell housing, to be honest, who would need this? I have an 09 (08 build) and just had my bellhousing replaced under warranty a couple months ago

Final #s coming soon
Old #s: 740whp & 680wtq on pump94 & stock block

'09 GT-R Red (Black Interior)

SJL Custom turbos w/ forge actuators

Built Block (courtesy of SJL)
Built Transmission (courtesy of SJL) w/ 2013 upgraded cooling lines
Full AAM Catless Variable Exhaust
AAM 3" Intake w/GTC inlets and AMS 4-bar MAP sensor w/ gotboost harness
AAM Intercooler w/ GReddy IC pipes & GFB BOVs
GTC Speed Density Tune (EcuTek)
Deutschwerks 950cc injectors & Wallbro Fuel Pumps
Boomerang & AUX/NAV bypass and Backup camera (courtesy of adrey)
ADV1 7.1 wheels in gloss black
AP JHooks, Endless mx72 pads, AMS Brake Lines
KW Sleeve's, Stillen Sway Bars

#11 GTRcHaRgEr Posted 26 June 2012 - 02:35 PM


 MF92, on 26 June 2012 - 02:26 PM, said:

guys, the GTR has a 5 year warranty for the bell housing, to be honest, who would need this? I have an 09 (08 build) and just had my bellhousing replaced under warranty a couple months ago

They replaced it under warranty with all those mods and the cobb?

09 Black Premium DBA Conversion ..... ALPHA 12 Powered TSM Tuned.....

#12 GTRBR Posted 21 February 2013 - 04:24 PM

  • Location:Brazil
Is this still available? I have a 2012 USDM GTR and I need to replace the bellhousing. Will need to have it shipped to Brazil.

2012 Silver GT-R
- Greddy Airinx Suction Kit
- Agency Power Downpipe / Cobb Catted Midpipe / Megan Cat-Back
- FIC 900cc Injectors
- Stillen Front Lip
- Volk G12 Wheels / R888 Tires
- Alcon Heavy Duty Rotors / Endless N05U Brake Pads

2011 Silver Lancer Evo X
- AMS Stage 2 (Full Intake / Exhaust / Intercooler)
- SSP Stage 1 SST Track Package
- Whiteline Sway Bars / Endlinks
- GS 3-Port Solenoid / Synchronic DV
- Girodisc Rotors / Ferodo DS-2500 Brake Pads

#13 Ronin1099 Posted 21 February 2013 - 11:06 PM

  • Location:LA
if you install it, will it void the warranty on 2010?

Posted Image

#14 j.mahara Posted 22 February 2013 - 12:34 AM

call me 347-451-4795 i will take it , im  in brooklyn

#15 j.mahara Posted 22 February 2013 - 12:36 AM

if its still available , call me asap

#16 sjj31 Posted 21 May 2013 - 05:13 AM

  • Location:Grand Rapids, MI 49341

 MF92, on 26 June 2012 - 02:26 PM, said:

guys, the GTR has a 5 year warranty for the bell housing, to be honest, who would need this? I have an 09 (08 build) and just had my bellhousing replaced under warranty a couple months ago

I have a built tranny, just curious if they gave you any hassle about the mods?

2010 Nissan Super Silver GTR – New Build April, 2014 @ 32,000 Miles (After 3 years of Bolt-On Fun!)
Jack’s Transmissions Engine Refresh (Forged Manley Rods & Pistons,Gaskets, Bearings, Seals etc.) + Heat Shielded Engine Bay

Turbo’s:GTC Stock Frame Spec V Turbos,Ported Upper/Lower Manifold,GTC 60mm Inlets,AMS 4Bar MAP Sensor
Tune:EcuTek – Ben Linney SD Flex Fuel Tune using Gotboost SD Kit and Visconti Flex Fuel Kit
Fuel/Injectors:Walbro 485 Pumps with AMS Hobbs Switch & Hardwired and Jack’s Seals,SIR 1150cc Injectors
Bolt-Ons:HKS Legamax Catback,HKS Non-Res Midpipe,GTC 90mm DP’s,Gotboost 3" Intakes w/Green Filters
Tranny:Built Stage 2+ - Billet Dodson Baskets A&B+PPG 1st Gear,Jack's 16 plate Clutch & Bell Housing Upgrade (drives like stock)

Cooling: ETS Intercooler/GotBoost IC Piping,SSP Tranny Cooler,Dodson Oil Thermo, AAM Oil Catch Can
Brakes: Alcon HD 396mm/JHook Rotors,Forged SS Lines,Hawk DTC 70/60 Pads,Upgraded OEM Painted Calipers (RB Stainless pistons/blue melt-proof seals/boots)
Fluids:Shell Rotella T 15w40 Engine (Jack's recommended), Castrol Diff, Jack’s Special Tranny Mix, Castrol SRF Brake
Wheels:Yokohama AVS F7 20x10+30,20x11+25,TSM Track Spacers (10/15mm),Toyo R888 285/35/20,315/30/20
Suspension:Full Penske 2 Way Coilovers with Eibach GTR Sway Bar Front and Rear, Corner Balanced, Track Aligned
Track:SFS Strut Bar,APR100-7718 Studs 12x1.5,Muteki Lugs,Sparco Harness Bar,Shroth 4PT,Difflow 5E Diffuser,Forged SW Lock
Look:DF CF Side Sills,Spats,ExShrouds,Rexpeed CF-M Splitter,OEM DRL's,SP LED Kit,GTMotoring Tow Hook
Extras:Hushmat Ultra (rear&trunk),Front Clear Bra,Full Tint,Clear JDM markers,Escort 9500ci Custom,VBOX

#17 bruno125sx Posted 12 June 2013 - 11:14 PM


is this still available?

thank you.

#18 bruno125sx Posted 18 June 2013 - 11:32 PM

hello any update?


Reply to this topic


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users