Jump to content

SPE Built: R32 GTR In For More Goodies

sp engineering os giken greddy hks

  • Please log in to reply
1 reply to this topic

#1 Eugene@SPE Posted 02 February 2012 - 07:18 PM

Eugene@SPE
  • Vendors
  • R35 Member

  • PipPipPipPipPip
  • 2,041 posts
  • Location:Los Angeles
Posted Image

Recently we completed a few updates to our good friend Jerry’s R32 GT-R.  Installation of  an OS-88 Six Speed Sequential Transmission for the RB26DETT,  as well as ACPT carbon fiber drive shaft.

Posted Image

From OS Giken:
“We have designed this sequential transmission to specifically fit the engine characteristics of Nissan’s RB26DETT engine to allow it to perform to its maximum potential. To withstand the incredible punishment a race tuned RB26DETT is capable of delivering to the drive train, we have used carefully selected forged and reinforced materials. By optimizing gear size and settings, we have increased the gear axis distance to 88mm, resulting in a 6-speed sequential transmission capable of withstanding up to 1500 horsepower. In addition, our original dog linked mechanism OS-88 Six Speed Sequential Transmission for RB26DETT enables accurate shift changes, as well as providing a positive shift feel. Each unit is hand made and thoroughly examined to our exacting standards prior to shipment to ensure the highest quality.”
It’s quite a beautiful piece, some pictures of the equipment upon installation:

Posted Image

Posted Image

Posted Image

We also revised the existing engine oil catch reservoir for the transmission fluid.

Posted Image

Posted Image

Below is stock vs aftermarket ACPTcarbon composite drive shaft.
In addition to minimizing rotational power losses, carbon fiber’s unique vibration dampening characteristics also help improve power output. Engine builder’s are familiar with the power gains that high performance crank dampeners can provide. ACPT’s carbon fiber driveshafts give you similar benefits by cutting power losses due to drivetrain vibration.

Posted Image

Posted Image

Jerry is currently running 650-675 AWHP on 91 pump.  A new tune using MS109 or C16 will be in the works (800+AWHP) now since his drivetrain has been upgraded.

A little test drive video:



Eugene @ SPE


Eugene Lee
Tel: 1.626.333.5398
Email: eugene@sp-power.com
www.SP-POWER.com
www.R35TT.com

Posted Image

#2 kcee91 Posted 02 February 2012 - 07:29 PM

kcee91
  • Members
  • R33 Member

  • PipPipPip
  • 781 posts
  • Location:Chandler AZ
Nice job guys!  I was just reading an old D Sport issue with Jerry's car! lol




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users