Jump to content

- - - - -

SAdesign: GO FAST BITS BOV's [SOUND CLIP]


  • Please log in to reply
23 replies to this topic

#1 Kris1 Posted 24 June 2012 - 06:35 PM

Kris1
  • Members
  • R32 Member

  • PipPip
  • 449 posts
  • Location:Pompano Beach, FL

Wanted to post this for those wanting to hear the GFB BOV's. Both bov's are set wide open full atmospheric.


We've got a great price on these for the pair and can ship anywhere. PM me for pricing.


Stop Dreaming. Start Building.






#2 messR35 Posted 24 June 2012 - 07:52 PM

messR35
  • Members
  • R32 Member

  • PipPip
  • 129 posts
  • Location:Reading, Pennsylvania
hey Kris i got these and i love them!   still working in getting my car out there for a wrap.  i looked at a shops work in Ny and there was dirt and wrinkles all over.  i cant have any of that as u know! I did see and pick a color out though! i am going to call rob at strasse forged tomorrow to see how bad they want to shoot the car.   may we can figure a way to get the car out there.   Im ready to go whenever!!



#3 Kris1 Posted 24 June 2012 - 08:31 PM

Kris1
  • Members
  • R32 Member

  • PipPip
  • 449 posts
  • Location:Pompano Beach, FL
SWEET! The company I use for enclosed transportation had issues with their computer systems on Friday. I should have an answer tomorrow and will PM you the moment i get the word!



#4 messR35 Posted 24 June 2012 - 08:41 PM

messR35
  • Members
  • R32 Member

  • PipPip
  • 129 posts
  • Location:Reading, Pennsylvania
sounds good ! thanks kris.  i also have cattless down pipes i will prob have u install and re mapp if i get out there!!



#5 krea.tion Posted 24 June 2012 - 10:39 PM

krea.tion
  • Members
  • R34 Member

  • PipPipPipPip
  • 1,630 posts
  • Location:Edmonton
OP, hope you don't mind me adding a video to this thread. I have one showing the GFB BOV (at 50/50 vent/recirc) close up as it goes off. They are awesome units!


Edited by krea.tion, 24 June 2012 - 10:40 PM.



2012 GT-R (AMS DP, AAM catted midpipe, GotBoost 3" intakes, Cobb AP tuned by Ben@GTC, GFB Respons BOVs) SOLD
2009 Yamaha R6 Race Bike (Graves full race exhaust, PowerCommanderV, Ohlins 30mm fork cartidges, Ohlins TTX36 MKII shock, Hyperpro damper, Braking WK rotors, Fren Tubo carbon lines, EBC GPFA pads, race requirement goodies)
2006 Suzuki GSXR600 Race Bike (Akropovic full race exhaust, Bazzaz ZFI-TC, head porting, Ohlins 25mm fork cartidges, Ohlins TTX36 shock, Ohlins damper, Galfer Wave rotors, Galfer SS lines, EBC GPFA pads, race requirement goodies)
2007 Lexus IS250 AWD (bone ass stock)
Posted Image

#6 D.T. Posted 25 June 2012 - 02:41 AM

D.T.
  • Members
  • R32 Member

  • PipPip
  • 341 posts
  • Location:Bay Area
I have these on my STI, and I love them...definitely a great product


- 2010 Nissan GT-R: 21” Cor, KW, Akra Slip On, AAM Non-Res Midpipe, AAM Race Downpipes, Cobb AP Stage 2, AAM Intake, KW Sleeve Kit
- 2006 Gallardo SE, Arancio Borealis
- 2008 C63 AMG

- 2007 CL600

#7 Str8ghten'emup Posted 25 June 2012 - 10:25 AM

Str8ghten'emup
  • Members
  • R32 Member

  • PipPip
  • 123 posts
  • Location:Sarasota, FL
Is a tune needed?


2013 Porsche 997.2 turbo
2011 BMW X3
2012 BMW 128i convertible

#8 FrankyGTR Posted 25 June 2012 - 02:39 PM

FrankyGTR
  • NAGTROC Certified Member
  • WHITE NINJA

  • PipPipPipPipPipPip
  • 4,179 posts
  • Location:EARTH
^^^^NO not needed but get one anyways LOL

im on 50/50 also but whats the best setting for the spring mine is slightly tucked in the hole 2 turns from being flush,,,, i got intakes downpipes cobb on the way if that makes a difference??
thanks

Edited by Franky2222, 25 June 2012 - 02:41 PM.



are you a GTR owner? join the owners facebook group,just ask me (3) Franky Gtr Love

#9 Str8ghten'emup Posted 25 June 2012 - 02:46 PM

Str8ghten'emup
  • Members
  • R32 Member

  • PipPip
  • 123 posts
  • Location:Sarasota, FL
So the car will run properly with BOV's and no tune?


2013 Porsche 997.2 turbo
2011 BMW X3
2012 BMW 128i convertible

#10 domino_z Posted 25 June 2012 - 05:14 PM

domino_z
  • Members
  • SpecV Member

  • PipPipPipPipPipPip
  • 3,244 posts
  • Location:Australia
The GTR doesn't drop the revs fast enough in park, you need to make a video driving under load

I've just bought a set too and will be swapping out my hks 4's. Setting spring tension seems a bit daunting though with an infinite amount of settings to trial and error

Edited by domino_z, 25 June 2012 - 05:18 PM.



2011 R35 (Aus spec) - 750awhp/600ftlb, FBO E85, WR600 ball bearing turbos, ported/polished oem manifold, Dodson Super Stock clutches + Jacks welded baskets, built and tuned by Willall Racing

#11 FrankyGTR Posted 25 June 2012 - 05:25 PM

FrankyGTR
  • NAGTROC Certified Member
  • WHITE NINJA

  • PipPipPipPipPipPip
  • 4,179 posts
  • Location:EARTH

View PostStr8ghten, on 25 June 2012 - 02:46 PM, said:

So the car will run properly with BOV's and no tune?
yes,but make sure they recirculate like the gofastbits ones

Edited by Franky2222, 25 June 2012 - 05:27 PM.



are you a GTR owner? join the owners facebook group,just ask me (3) Franky Gtr Love

#12 krea.tion Posted 25 June 2012 - 06:19 PM

krea.tion
  • Members
  • R34 Member

  • PipPipPipPip
  • 1,630 posts
  • Location:Edmonton

View PostFranky2222, on 25 June 2012 - 02:39 PM, said:

^^^^NO not needed but get one anyways LOL

im on 50/50 also but whats the best setting for the spring mine is slightly tucked in the hole 2 turns from being flush,,,, i got intakes downpipes cobb on the way if that makes a difference??
thanks

Franky,

I think that is too tight, I have mine set about 2mm sticking out.


2012 GT-R (AMS DP, AAM catted midpipe, GotBoost 3" intakes, Cobb AP tuned by Ben@GTC, GFB Respons BOVs) SOLD
2009 Yamaha R6 Race Bike (Graves full race exhaust, PowerCommanderV, Ohlins 30mm fork cartidges, Ohlins TTX36 MKII shock, Hyperpro damper, Braking WK rotors, Fren Tubo carbon lines, EBC GPFA pads, race requirement goodies)
2006 Suzuki GSXR600 Race Bike (Akropovic full race exhaust, Bazzaz ZFI-TC, head porting, Ohlins 25mm fork cartidges, Ohlins TTX36 shock, Ohlins damper, Galfer Wave rotors, Galfer SS lines, EBC GPFA pads, race requirement goodies)
2007 Lexus IS250 AWD (bone ass stock)
Posted Image

#13 FrankyGTR Posted 25 June 2012 - 06:38 PM

FrankyGTR
  • NAGTROC Certified Member
  • WHITE NINJA

  • PipPipPipPipPipPip
  • 4,179 posts
  • Location:EARTH

View Postkrea.tion, on 25 June 2012 - 06:19 PM, said:

Franky,

I think that is too tight, I have mine set about 2mm sticking out.
oh yea ok ill try it out


are you a GTR owner? join the owners facebook group,just ask me (3) Franky Gtr Love

#14 Kris1 Posted 25 June 2012 - 08:18 PM

Kris1
  • Members
  • R32 Member

  • PipPip
  • 449 posts
  • Location:Pompano Beach, FL

View PostStr8ghten, on 25 June 2012 - 10:25 AM, said:

Is a tune needed?

I have mine set full atmospheric and is seen in the video. We adjusted the tension at wide open setting. Thought it might effect idle but didn't one bit. No tune yet and driving fine. Trying to get away from customer cars to get my ride on our dyno!



#15 Pizzamangtr Posted 26 June 2012 - 02:26 PM

Pizzamangtr
  • Moderator
  • SpecV Member

  • PipPipPipPipPipPip
  • 4,220 posts
  • Location:Harrisburg , Pa.
I have these also and they leak. I pressure tested them. And another guy with one on an evo leaked also. Anyone test there's?


Posted Image


#16 FrankyGTR Posted 26 June 2012 - 04:04 PM

FrankyGTR
  • NAGTROC Certified Member
  • WHITE NINJA

  • PipPipPipPipPipPip
  • 4,179 posts
  • Location:EARTH

View PostPizzamangtr, on 26 June 2012 - 02:26 PM, said:

I have these also and they leak. I pressure tested them. And another guy with one on an evo leaked also. Anyone test there's?
how can i tell if there leaking :dunno:


are you a GTR owner? join the owners facebook group,just ask me (3) Franky Gtr Love

#17 hks Posted 26 June 2012 - 04:41 PM

hks
  • Members
  • R32 Member

  • PipPip
  • 263 posts
  • Location:san jose
wish people would do videos while driving, same goes for exhaust videos.


money cant buy taste. GTRice taking over

#18 Kris1 Posted 26 June 2012 - 08:09 PM

Kris1
  • Members
  • R32 Member

  • PipPip
  • 449 posts
  • Location:Pompano Beach, FL

View Posthks, on 26 June 2012 - 04:41 PM, said:

wish people would do videos while driving, same goes for exhaust videos.

Have Go Pro vids coming up soon. Didn't have time to get them together...Stay Tuned



#19 domino_z Posted 26 June 2012 - 10:46 PM

domino_z
  • Members
  • SpecV Member

  • PipPipPipPipPipPip
  • 3,244 posts
  • Location:Australia
dave has already done the hard work

bovs + intake




2011 R35 (Aus spec) - 750awhp/600ftlb, FBO E85, WR600 ball bearing turbos, ported/polished oem manifold, Dodson Super Stock clutches + Jacks welded baskets, built and tuned by Willall Racing

#20 ZereqiGTR Posted 16 September 2012 - 08:10 PM

ZereqiGTR
  • Members
  • NAGTROC Newbie

  • Pip
  • 6 posts

View Postdomino_z, on 26 June 2012 - 10:46 PM, said:

dave has already done the hard work

bovs + intake







0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users