Jump to content



GT-R Life Premier Sponsors


GT-R Life Int'l Sponsors



Facebook


Twitter





Enshiu's 580whp Upgrade



Hi all,

I am doing my small project on my car

Status till now

01.03.2008 First registration in Japan
01.12.2008 Import UK by JAPPerformance using an ESVA test.
05.12.2008 Car on name first owner
21.03.2011 Car bought on my name
06.10.2012 Left UK and heading to NL
03.12.2012 Importing car in NL


There is only 15K mls /25K km but,

Green = completed

Red = not completed yet

Blue = under progress

Violet= upgrades received but, not installed


Yellow= cancelled

Repairs:


- MPH to Km/h again by removing the converter(13.04.2012)
- LED license plate light(Dec 2011) and front sidelights (13.04.2012)
- LC1 updated to LC2 at HPC with Consult III.(2009)
- LC2 to LC5 through COBB AP NIS 006 (2012)
- TM oil change (to FFL-4 ) 9.7L (OEM is rip off) (2011)
- differential oil change (75W140 GL-5 Castrol OEM) (2.1L) (2011)
- engine oil change (Mobil1 0w40 new life) (5.5L) + K&N filter (Dec 2011)
- Engine oil changed to 10w60 (4.5L)+ K&N filter. (Apr 2012)
- Solenoids cleaning VB GR6.

- Airco gas check.
- removing scratches on the frontlip. (not useful so let it be as it is).
- Carbon footmat worn (see pic).
- Passenger seat worn on the inside.
- two front tyres changed because of alignment.
- Coolant line extension to the underside for overpressure.
- Foglight changed from side 03.05.2012
- Fog light seperate and reverse light back both working (2012.5.4).
- Headlights alignment change from directions.(31.05.2012)

- backup camera install.
- NGK spark plugs change (DILKAR8A8 93026)
- 18.2 plates (not finished importing yet)


Engine upgrades


- Cobb AP NIS 005
- Cobb AP NIS 006 upgrade



- GTC 650R conversion not finished yet (630hp fly = 1.3bar (19psi).
> Apexi 500-A029 Intake with custom intake pipes with MAF sensors.
> Agency highflow downpipes (catted)
> GTC 4” y-pipe unresonated
> GTC 4” Titan catback
> ID 1000cc injectors
> Okada plasma coil pack set
> Forge coolant hoses
> Forge engine oil cap
> forge alu header tank
> Nismo rad cap.
> HKS rad cap.
> Samco vacuum hoses


> Forge Induction Kit cancelled, v1 discontinued.
> Boostlogic 3” intake aluminmum polished. I have made something custom I like


> GTC custom tune 1.3 bar (19 psi)


> XS power titanium intercooler pipes ,Turbo intake pipes 2 3/8”; (60mm) 2 3/8” (60mm) intercooler pipes 2 3/8” to 2 1/2”
> Greddy RZ BOV twin VTA setup

Transmission parts:

WR35 SERIES TRANSMISSION PARTS

WR35PS 2 GTR piston seals replacing (broken)
WR35CC 3 GTR Transmission Gears fastener set
WR35PS 1 GTR Gearbox Piston Seal replacement
WR35CCL 2 GTR Clutch Retaining Clips
WR35DS 1 GTR Rear LSD Super Lock Kit
WR35TB 1 GTR GR6 Transmission ace
WR35GS 8 GTR Gear Stoppers
WR35TPU 1 Transmission Pressure Unit
WR35GM 1 GTR Urethane Transmission Mount
WR35 1 GR6 High Performance GTR Synchro Baulk Rings
WR35TSB 2 GTR Bell-Housing Shims
Rear diff oil seals 2 x OEM

HKS oil pan baffle honeybcomb
HKS ATSC 4WD torque adjuster

http//www.nagtroc.org/forums/index....or-drag-setup/

Brake upgrades:

- Air ducts front brakes 3" custom made.
- Alcon J hooks discs
- EBC yellowstuff pads

Misc upgrades:

Nissan GT-R R35 Carbon Fiber License Plate Backing
[CBX-R35LIC] (Dec 2011)
Full LED swap including the reverse lights (July 2012)
Handake bypass and speed signal bypass (29.11.2012)

Optima yellowtop 2.7RJ gel battery upgrade ( March 2012)
Ctek XS3600 trickle charger with comfort indicator (November 2011)
Ctek XS25000 trickle charge for the quick jump starts (July 2011)


I am doing it slowely so have patience

Some pics at events

Race Wars Heusden/Zolder Be 15.04.2012:

Posted Image

Posted Image

Posted Image

Posted Image

JAF 2012: 29.04.2012

Posted Image

Posted Image
Promote to Community: https://www.gtrlife.com/forums/topic/78586-enshius-small-580whp-upgrade/


175 Comments

APR carbign craft make these and I got it from Dan @ Vividracing.

Part no. from APR is CBX-R35LIC


Posted Image

Or this?

Posted Image
the top one, thank you!

the top one, thank you!


Your Welcome.

Give a call or pm to one of the vendors here they will sort it out for you.

I haven't seen anyone driving with this piece of CF.
Cant wait to see more pics of those titanium intercooler pipes. Where did you get them from?

Cant wait to see more pics of those titanium intercooler pipes. Where did you get them from?


I got from XS-power but, the seller has a bad rep. somehow here.

These pipes don't need to be in the heat like the exhaust so should be fine.

They are dishwasher proof as I have to wash the iron solenoid left by production out of it with a dishwasher.

http://stores.ebay.c...&_sid=243088228

Many thanks. I will post the picture when I am finished installing those intakes.

It looks like this:

Posted Image

MO, does the 76mm ID hoses fit on a 83mm OD intake side?

sorry i just saw this. i dont remember, been awhile and i already did spring cleaning in the garage i dont have any hose left out to check.

xs power are bad for many many many reasons, they just seem to create the issues left and right. from false advertising, to vengful unprofessional comments in their product ad's, again false comments in advertising, making it appear their product is better than 1000 dollar products when their products clearly are low quality and often crack. questionable practices of opening new accounts to false advertise to gain trust of people. parts that dont fit. lack of support or care to replace products that dont fit or break. i could keep going on this, i really can.
The filter looks quite small?
wow, good stuff "enshiu"

anymore updates?

The filter looks quite small?

https://www.gtrlife.com/forums/topic/77369-apexi-air-filter-on-gtr/

sorry i just saw this. i dont remember, been awhile and i already did spring cleaning in the garage i dont have any hose left out to check.

xs power are bad for many many many reasons, they just seem to create the issues left and right. from false advertising, to vengful unprofessional comments in their product ad's, again false comments in advertising, making it appear their product is better than 1000 dollar products when their products clearly are low quality and often crack. questionable practices of opening new accounts to false advertise to gain trust of people. parts that dont fit. lack of support or care to replace products that dont fit or break. i could keep going on this, i really can.


Yea, I know. I have been getting alot replies from them tbh. The exhaust is more the issue as those welds are not up to the job for the heat coming out of the turbo's.

Other pipings should be fine as they don't need to be in the heat and just boost. Will review them after testing them.

That will be the only item from them.

The filter looks quite small?


5-6" cone is small?

wow, good stuff "enshiu"

anymore updates?


Not yet, just got my Meguaris polish set but, no pics.

http://www.gtrlife.c...-filter-on-gtr/


Thanks MO.
btw, no matter the parts for your build, i love it! keep up with the good work, love the pics!
Can't wait to see your car on Friday man!

https://www.gtrlife.com/forums/topic/77369-apexi-air-filter-on-gtr/


Just saying they look smaller than the K&N's supplied with the GTC kit, scroll down a couple of pics on my thread

http://www.gtr.co.uk...tml#post1593974

+1 filter looks small like it should be on a 1.3L na car

for sake of £300 cant believe you didnt go mappers choice intake

+1 filter looks small like it should be on a 1.3L na car

for sake of £300 cant believe you didnt go mappers choice intake


Thanks for the reply Ben.

Experiments with anything new is always taking the tuning one step ahead.

I need non-oiling filters and these are the only choice or AEM ones.

Had a few email exchanges with Apexi USA a few weeks ago and they said these are ok up to the HP I am running.

Seen a few R32 GTR running these at 600hp and works fine so why should it not work for a R35?
ok cool lets test if you want

ok cool lets test if you want


Is there any issue with mapping Ben?

ATI pulley damper has arrived:

Still no registration papers:



Box:
Contents:
Damper itself:



Is there any real data on how the pulley performs?
That will depend how clean the air flows past the MAF, it's in a different location to GTC intakes.

Is there any issue with mapping Ben?


i'm not physic wont know until we datalog, but cant just throw any old filter onto any intake pipe they all greatly effect the flow of air over the maf sensor

Is there any real data on how the pulley performs?


http://www.atiracing...amper_dinan.htm

i'm not physic wont know until we datalog, but cant just throw any old filter onto any intake pipe they all greatly effect the flow of air over the maf sensor


Many thanks Ben, you are my hero :D

They are new :D
Still no papers but, some maintenance items came in just ago.

Posted Image
keep them comin' hahaha :thumbsup:

keep them comin' hahaha :thumbsup:


Thanks HTL and all other members, supporters and Moderators.

My best Christmas present delivered today at 18.00 CET:

I wish you all a nice Christmas and a happy new 2013.

Present:

Posted Image

Car registration papers :

Posted Image

Found under the Christmas tree :zzz: :bump: :clap:

Posted Image

Does anyone still need a Christmas bauble XXXXXXXXXXXL ? :>>: :up: :clap:

Posted Image
damn, finally that paper come through!

Merry christmas and happy new year to you too..

2013 is around the corner, best of luck 4 you ! :lol: :lol: :lol: :lol: :lol: