I need to have my alignment adjust back to street setting and I am not thinking to bring it into a dealershit as they will just charge me like theres no tomorrow.
So if anyone out there that know the spec of the street setting camber, toe in etc.., could you please post it up so I can have a shop adjust it back to street setting.
Thanks in advance! and also it won't triggle any sensor right?
I also have one more question for you guys, if I swap in another set of stock GTR wheels from another GTR, will it triggle the sensor to go off?
If you can find a brake and alignment
specialty shop then it may cost about $90-100 for a GTR Alignment
They usually have the specs at the shop available but bringing in the info posted in this thread is helpful.
If you align to street specs you should be fine.
Keep tire pressures up or even slightly higher is fine.
If you like your GTR more responsive you can ask for-
Front toe zero or slightly toe out but within specs, slight toe in for front and rear is usually the factory setting but it's a little less responsive in turns.
minimum settings are more aggressive.