7 replies to this topic

[yianni]

I can't find it anywhere online. I believe it says "analog fuel pressure high input" This was after a new tune. Tuner has the logs, but I'm wondering what it is Sent from my SM-G973U using Tapatalk

[yianni]

Here's the code Sent from my SM-G973U using Tapatalk

[sterod]

Did the tuner install a fuel pressure monitoring system?  If so, they may have setup the sensor voltage tables incorrectly.

 

https://cobbtuning.a...ateway DTC List

[JohnnyTSi]

100% tune related - I just went through this when I installed a Cobb Fuel Pressure monitoring kit. My car would pop E1010 "analog fuel pressure low input" Once I figured out the correct settings (with some help from my gtr forum friends), the DTC stopped happening.

 

John-

[yianni]

100% tune related - I just went through this when I installed a Cobb Fuel Pressure monitoring kit. My car would pop E1010 "analog fuel pressure low input" Once I figured out the correct settings (with some help from my gtr forum friends), the DTC stopped happening.
 
John-

Thank you. By tuner fixed it as well as explain it to me

Sent from my SM-G973U using Tapatalk

[haseeb]

I had the same issue but solved now U need to reduce the base fuel pressure at idle Ur exceeding the limit of the fuel pressure sensor .. Thanx Sent from my iPhone using Tapatalk

[coprims]

100% tune related - I just went through this when I installed a Cobb Fuel Pressure monitoring kit. My car would pop E1010 "analog fuel pressure low input" Once I figured out the correct settings (with some help from my gtr forum friends), the DTC stopped happening.

 

John-

long dig here...dont suppose you have the settings you applied?

 

This has been annoying me on my car for a while now

[JohnnyTSi]

Max Sensor Voltage = 5.1009

Min Sensor Voltage = .4508

Gradient = 259.2

Sensor Offset = 129.25

Sensor Source = 0 (Left TIP on my car)