Jump to content


Photo

Gotboost Performance Engine/ Trans Build.....The GBP 900 kit

GODZILLA AWAKES

955 replies to this topic

#1 [email protected]

[email protected]
  • Location:Sherwood, Oregon

Posted 21 December 2011 - 08:44 PM

I decided it was time to step it up a notch, and produce an engine package with utmost quality and performance in mind while trying to keep the GT-R tax at a minimum. Follow me as I build my car with a package that we will soon offer when everything is to my liking. I have chosen some of the best parts in the industry for this build, along with many of the products we currently produce and a few that we will be releasing soon.

This particular package will be called the GBP 900 package and should easily produce around 800+whp on E85 when finished.
Also John Shepherd from Shep Trans will be providing me a STAGE II.5 GT-R trans upgrade.

The build will consist of:

Pistons: CP Carillo w/ coated skirts
Rods: Carillo
Cams: Tomei 256/264
Headstuds: Nissan stock oem
Heads: Blended and polished ports by [email protected]
Headgaskets: Stock oem
Valve Springs: Kelford single springs
Oil Pump: Stock oem
Turbos: GTX Hybrid by SIR
Actuators: Forge
Inlet pipes: Gotboost Performance custom 2.5" to 3.0" with heat barrier wrap
FMIC: AMS
I/C Piping Kit: 3" Gotboost Performance upper and lower piping
Intakes: 3" Gotboost Performance with MAF delete
Throttle Bodies: Modified oem
Blow Off Valves: Tial Q
Injectors: Injector Dynamics ID 2000's
Fuel Rails/ Regulator : AMS/ Fuel Lab
Fuel Pumps: 3 pump system by Tony @ T1Race
Downpipes: AMS non-catted ceramic coated black
Midpipe: Gotboost Performance non-catted
Rear Section: T1R stainless
Engine Control: Cobb AP 006 w/ Gotboost Performance SD Conversion Kit
Coolant overflow: Gotboost Performance custom tank
Tranny Cooling: 2012 spec trans cooling
Tuning: Tim Bailey

Trans Upgrade Stage 3 by John @ Shep Trans:

PPG 1st gear set
Dodson Sportsman clutch
Dodson FWD retainer
Dodson Mechanical lock #1
Dodson Mechanical lock #2
Selector Piston Shims
O-ring and seal upgrade kit
Oil pump shaft upgrade with blueprint
6 neodymium magnets
High temp rear differential oil seal
Stainless re-usable internal filter
Transmission brace by Gotboost Performance

Edited by [email protected], 20 November 2012 - 10:06 PM.

'09 GT-R titanium:
Follow My Build Here: http://www.gtrlife.c...__fromsearch__1

Innovative GT-R products at their finest

Posted Image

www.gotboostperformance.com
[email protected]
email and paypal

Posted Image

#2 Python

Python

Posted 21 December 2011 - 08:55 PM

Doing big things over there. Keep up the good work.

#3 monEmakindave

monEmakindave
  • Location:Bridgewater NJ

Posted 21 December 2011 - 08:58 PM

How about a package with all the bolt ons packaged together for the stock engine guys.
www.thespeedlounge.com<br /><br /><br /><br />2011 PW GT-R. EcuTek Tuned by Visconti. Switzer 90mm exhaust 3" intakes, And KW's

#4 [email protected]

[email protected]
  • Location:Sherwood, Oregon

Posted 21 December 2011 - 09:00 PM

How about a package with all the bolt ons packaged together for the stock engine guys.

Don't worry there will be multiple ways to buy!
'09 GT-R titanium:
Follow My Build Here: http://www.gtrlife.c...__fromsearch__1

Innovative GT-R products at their finest

Posted Image

www.gotboostperformance.com
[email protected]
email and paypal

Posted Image

#5 Scuba_Steve

Scuba_Steve
  • Location:Colorado Springs, CO

Posted 21 December 2011 - 09:07 PM

Good stuff! Looking forward to the results and most of all PRICE! :thumbsup:

#6 GTRheritage

GTRheritage
  • Location:Blue Water and White Sandy Beaches

Posted 21 December 2011 - 09:30 PM

Good for you Dave :clap:

#7 rutiger

rutiger
  • Location:seattle

Posted 21 December 2011 - 10:59 PM

my wife is going hate you dave, cuz i'm going to want this ;)

#8 jchris

jchris
  • Location:Seattle

Posted 21 December 2011 - 11:10 PM

When the time comes, I'd be interested in the prices for the multiple packages....

FINALLY ....a potential builder in the Pacific NorthWest!!! Yes!!!

Thanks!!

Edited by jchris, 21 December 2011 - 11:12 PM.


#9 GDZLLAA

GDZLLAA
  • Location:OC

Posted 22 December 2011 - 12:19 AM

Looking forward to your build!
2009 Nissan GT-R Super Silver

[color="#8b0000"
HKS Resognated Y-Pipe
Meisterchaft Exhaust
Downforce CF Front Lip, Side Splitters, Exhaust Shields, Rear Wing Lip,
Tint, Full clear bra[/color]
[color="#8b0000"] [/color]

#10 p.karageorgiev

p.karageorgiev

Posted 22 December 2011 - 02:09 AM

Looking forward to your build!


+1
1GTRBulgaria

#11 ckp

ckp
  • Location:Stanwood, WA

Posted 22 December 2011 - 02:38 AM

When the time comes, I'd be interested in the prices for the multiple packages....

FINALLY ....a potential builder in the Pacific NorthWest!!! Yes!!!

Thanks!!


+1 to this - especially in the Pacific NW! :thumbsup:

Edited by ckp, 22 December 2011 - 02:38 AM.

Posted Image

2013 GT-R | White | Premium - Delivered 5/4/12
Full Bolt on E85 - AMS Tuned

#12 paparazzi

paparazzi
  • Location:Trinidad & Tobago

Posted 22 December 2011 - 07:49 AM

Good stuff Dave, good selection of parts.

Might I suggest options for WPC treatment on certain parts and DLC application to the crank.

What about posting options?

Edited by paparazzi, 22 December 2011 - 07:50 AM.

R35 JDM MINE'S  
R34 JDM Spec V II


#13 Wicked

Wicked
  • Location:Inside Your Head

Posted 22 December 2011 - 10:29 AM

Subscribed!
Redemption 2.0 Tuned by Ben Linney = Smooth as Fawk!!
Switzer 90mmSS Exhaust = Loud as Fawk!!


#14 NWapache

NWapache
  • Location:Kirkland, WA

Posted 22 December 2011 - 10:37 AM

Jeez dave, no wonder you dont have any time left! Good work, looking forward to the build.

Edited by NWapache, 22 December 2011 - 10:38 AM.

2010 blk premium
Cobb mid pipe
Cobb AP 006
TopSpeed tuned 5xxwhp/5xxtq
KW sleeves
Best 1/4 to date [email protected] mid boost tune 92 octane

#15 [email protected]

[email protected]
  • Location:Sherwood, Oregon

Posted 22 December 2011 - 11:04 AM

Good stuff Dave, good selection of parts.

Might I suggest options for WPC treatment on certain parts and DLC application to the crank.

What about posting options?


Haha Shiv,

I was goiung to do that as NickTO recommended the WPC treatment also.
'09 GT-R titanium:
Follow My Build Here: http://www.gtrlife.c...__fromsearch__1

Innovative GT-R products at their finest

Posted Image

www.gotboostperformance.com
[email protected]
email and paypal

Posted Image

#16 [email protected]

[email protected]
  • Location:Sherwood, Oregon

Posted 22 December 2011 - 05:01 PM

my wife is going hate you dave, cuz i'm going to want this ;)


No need to worry, just have her talk to my wife and Bev will calm her down..lol.
'09 GT-R titanium:
Follow My Build Here: http://www.gtrlife.c...__fromsearch__1

Innovative GT-R products at their finest

Posted Image

www.gotboostperformance.com
[email protected]
email and paypal

Posted Image

#17 sleepdoc

sleepdoc
  • Location:South Florida

Posted 22 December 2011 - 05:08 PM

Excellent !

Looking forward to the results.

SOLD - Gunmetal 2010.TE37 ULTRA 20x10-31 20x12-20 2013 Trans. EcuTek,[email protected], Fabshop Miami, SIR injectors, SIR intake/inlet porting, Stock DP's, HKS resonated midpipe, HKS Spec R Catback , Gotboost intakes, SBD Denso pumps, e85.

10.38 @137 on factory DP's and PSS's

Bone Stock 2010 Record- 11.38 @ 121.44 60' 1.637

2010 Black GTR--- SOLD
Stock Turbo 1/4 mile
10.003 @ 137.61 60' 1.453 thread
Cobb AP NIS 006 - Jack Cecil Custom Tunes on ECU and TCM


#18 nlpamg

nlpamg
  • Location:So. Cal.

Posted 22 December 2011 - 05:14 PM

sick!
-Phil
AMS DPs | HKS Res. MP | ID1000s | GB 3" Intakes | Tuned by Chris [email protected]

#19 tripleJs15

tripleJs15
  • Location:Franklin, TN

Posted 22 December 2011 - 08:57 PM

Subscribed!

In for a non GTR taxed upgrade package !
2013 GT-R Black Edition (Jet Black) - Mods on the way
2010 GT-R Premium - Ben @ GTC Tuned, E85 and supporting mods, 360Forged Concaves on Toyo's

#20 'Q

'Q
  • Location:Kingdom of Bahrain

Posted 22 December 2011 - 09:06 PM

Nice mix of mods. Good luck Dave. :clap:

Facebook Admin/Content Creator:
Facebook.com/MEGTROC

Formerly known as member GT3240x2




Reply to this topic



  

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users