Jump to content


BLURSPEED

Member Since 28 Aug 2013
Offline Last Active Nov 13 2020 02:17 AM
-----

Topics I've Started

FS/WTT: 2016 Corvette Z06 for R35 GTR (2013 and up)

09 June 2018 - 02:51 AM

Whats up everyone! Long time forum member here. Had 2 GTRs in the past (2012 Premium and 2014 BE). Before my move to Hawaii I traded in my 2014 BE for a 2016 Corvette Z06. Well I miss it and looking to get back into one. Hopefully will need the back seat soon and I miss the AWD. LoL.
2016 Chevy Corvette Z06
VIN: 1G1YS2D61G5601687
It is nicely modded and low mileage. One of a kind, adult owned 2016 Chevy Corvette Z06 in Artic White with adrenaline red interior. It has the A8 transmission (paddle shifters). Currently it has about 6K miles, but that will change because it is my daily driver unfortunately. I am the 2nd owner and car is being financed through Chase. This car is in showroom condition and has always been taken care of very well. Hand washed and waxed every other week. This car puts down 574 hp and 599 tq. Car has never been tracked or abused. No track or drag strip here on the island so never got to. I've never launched the car in its life. Clean title. About $5k invested into the car, parts and labor. Everything was installed by Hawaii Performance Technology and maintenance done by Cutter Chevy. Car runs perfectly, smooth, powerful and has never had any issues. You need to see this car in person to appreciate it to the fullest. Turns heads all the time and always gets compliments. You definitely won't be disappointed. Car is perfect other than a small crack on the lower part of the front lip. I was going to buy a new one, but never got around to it.

With that being said not looking for any trades unless it's a nice low mileage 2013 and up R35 GTR. No dealers and no consignments. No test drives without deposit & proof of funds. Serious buyers only, please have your finances in order before you contact me. Price is pretty firm because I'll have to pay a small amount out of pocket for the negative equity. I have the price based off KBB Private Party value.

Performance extras:
Injen Technology intake
Katech ported throttle body
NGK plugs
Borla x pipe
Magnaflow exhaust

Exterior extras:
Stage 2 OEM front splitter with winglets (has small crack on it)
Stage 2 OEM full sideskirts
Lowered on stock bolts (got alignment after at Cutter Chevy)
Smoked out front side markers, rear side markers, and rear bumper lights
MM Solutions rear brake scoop savers
35% window tint all around (including front windshield)

Interior extras:
Full interior LED bulb swap

DELETE: Testing Waters on trading almost new Enkei PF01 drag wheels w/ street tires and...

05 October 2017 - 02:18 PM

I'm testing the waters on my basically new (roughly 600 miles including 2 1/4 mile passes) black 18 inch Enkei PF01 drag wheels wrapped in Continental Contisportcontact 5 wheels up front (275/45/18) and Mickey Thompson ET S/S drag radials (345/35/18). Front wheels are 18 X 9.5 + 15 and rear wheels are 18 X 10.5 + 15. Wheels are super light and tires are super sticky. These fit CBA and DBA but for DBA I recommend slightly shaving brake caliper/bolt. Some put them on DBA without shaving and some shaved. It was too close for comfort for me so had mine shaved a little bit. Looking to trade for some nice but fairly light 20 inch wheels (flow forged on) with tires that have just as good tread left (90% or more). Altogether I paid close to $3K for the wheels and tires. Love the look of the wheels and most of all the performance. Helped me get 2 10.6 slips on stock tune. Just 2.75 intakes, midpipe, exhaust and some weight reduction. Only reason want I'm considering trading them is I'm moving to Hawaii next month and there is no drag strip there :(. Must meet at Hampton VA to do trade at my local dealer since I'm keeping my TPMS unless you including TPMS or willing to pay for shipping. NO STOCK wheels and STOCK TIRES please. Let me know. Thanks!

Richmond Dragway 29 Sep

05 September 2017 - 06:22 PM

A buddy of mine in his FBO E85 GTR and I will be running our cars on 29 Sep at Richmond Dragway. Gates open at 5pm and racing starts at 6. Would be great to have other GTR's out running as welll :)

Few pictures of my 2014 Black Edition

19 August 2017 - 08:06 PM

Got some new photos from a photo shoot with a professional photographer and some that I took on my own with the mighty iPhone. LoL. Enjoy :)

DELETE: Testing waters on basically brand new pair of Nitto NT555R drag radials (305/40...

05 August 2017 - 08:41 PM

I'm testing the waters on my pretty much brand new Nitto NT555R drag radials in 305/40/18. Just got them mounted and put on yesterday but it looks a little bit too aggressive because wheels already stick out 1/8th past front fenders because offset. Might not look as aggressive on some Advans, Volks or CCW's with better front offsets. If I can sell for close to what I paid then I'll sell and just buy some 275/45/18 street tires for the fronts. I paid $301.14 each on Amazon and only has 25 miles on them (no launches). Literally drove home yesterday from dealership and to Cars & Coffee this morning. Willing to sell the pair for $575 and I'll pay for shipping as long as less than $60 to ship. If not I'll just keep them. Thanks!