Jump to content


M3AP1

Member Since 16 Sep 2019
Online Last Active Yesterday, 11:15 PM
-----

Posts I've Made

In Topic: DBA Rotor Replacement.. questions

23 September 2020 - 09:08 PM

https://racingbrake.com/ml1-e


In Topic: Nankang AR1 tire

22 September 2020 - 10:43 PM

Why must these and RRR's be noisy??? I run cup 2s because of the howl............There is no reason these 2 tires are howlers.............???

 

 

They're meant for racing. Not for comfort. Cup2 are quiet and comfortable but not nearly as fast as AR1 in my experience on a road course. 


In Topic: Delete

29 July 2020 - 02:00 PM

N05U is a full race compound used on Cup cars with aggressive bite and heat capacity. What other pad compound could I try with similar or better characteristic? 
Many owners from what I've read ran ME20, which is a grade below N05U so they will not be up to par with my type of track driving. 

 

Try a different pad. Looks like pad compound is not up to track duty.


 


In Topic: Nankang AR1 tire

27 July 2020 - 08:41 PM

Do they fit under front stock fender?
Planning on running them too.






" timestamp="1594834431"]

I run AR1 305 square. They have lots of grip. IMO, far better than R888r since they don't grease when hot. 
They do run slightly narrower. They do howl but not as loud as R888r. [/quote]

 

I'm on stock rolled fenders. SPL front camber arms. 
Track set up is 20x10.5 +25 on 305 square. 25mm spacer in the rear. 


In Topic: Nankang AR1 tire

15 July 2020 - 11:33 AM

I run AR1 305 square. They have lots of grip. IMO, far better than R888r since they don't grease when hot. 

They do run slightly narrower. They do howl but not as loud as R888r.