Nissan GT-R Forum banner
gt1r

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 17 Results
  1. WTB
    I'm looking for a used GT1R or Alpha Air/Oil Separator (AOS) in good condition with all lines and dipstick. Let me know if you have one you're looking to part with. I'm located in Houston, TX for shipping. Please PM me for fastest response. Thanks in advance!
  2. GT-R Media
    As most everyone is aware we participated in the 1/2 mile race hosted by wannaGOFAST this past weekend at Horseshoe Bay in Texas. It was a blast and a very cool site. I think I can speak for everyone at T1 when I say we had an amazing three days out there. Tony's Alpha 20 car was a huge...
  3. R35 GT-R
    We've had quite a few requests and we finally got a chance to put together some Flex Fuel kits. These do not include a PNP wiring solution, they still need to be wired in to the MAF input if you want to do actual flex fuel tuning through the ecu. We have 3 kits, one that's just plumbing and...
  4. R35 GT-R
    As TX2K approaches we, like most other shops, are wrapping up quite a few projects. Rob's Super Silver car was already packing quite a punch with one of our 3.8 engines, and ETS 30R kit, Shep Stage 3 trans, and other supporting goodies. After last season wrapped up Rob decided he wanted to...
  5. R35 GT-R
    Nothing too crazy, except it gives those going to 2K a little idea of what their ear drums will be experiencing! See you guys next week!
  6. R35 GT-R
    GT1R VR38 Harmonic Damper The VR38 engine has proven to be an absolute powerhouse of an engine, and for the most part taken very well to upgrades and huge power increases. With those power increases come increased forces and loads on parts. After seeing a couple of crankshafts break in high...
  7. R35 GT-R
    Many of you have already seen the video we put out on this red 2013 GT-R we finished up last week, but I figured a full build thread with pictures would be nice as well. Shawn had this 600-mile car delivered too us a few months back and with a plan in place we already knew this car was going to...
  8. R35 GT-R
    I have always wanted to make a cool car video, I just never had enough motivation to do it until now! I made this entire short film using a GoPro Hero 3 Black Edition and some DIY camera rigs. I did all of the editing in iMovie and Motion 5 on my Mac. Took me a few weeks to figure out all of...
  9. R35 GT-R
    We had the pleasure of delivering another beastly R35 to one of our good customers Ben last week. Ben drove his car up to us a while back from Mississippi and it has been an absolute pleasure getting his car to where it is now. He was looking for a 1,000+whp car he could reliably get in any...
  10. R35 GT-R
    Hey guys, we're finally ready to release our air/oil separator kit. We've had this in development for some time and i'm happy to say it's ready to go and has been tested in extreme situations with success. Shep ran this on his car this past weeekend where he annihilated his previous drag...
  11. GT-R Media
  12. R35 GT-R
    We had the pleasure of delivering this gorgeous white R35 back to Tuan (topend) this weekend after an amazing build. We couldn't be happier to have him as a customer and it was awesome getting to see him get this beast back and race it the same day. The car came to us a while back with a...
  13. Transmission & Drivetrain
    We've had a couple OEM 2/4 shift forks break on us so far, and with the lack of available options, we decided to build our own. These have been in the works for some time now, but they are available and on the shelf now. The cost is $1295. These are made out of 4140 Chromoly, so they're many...
  14. R35 GT-R
    I've owned this car since Jan of 2012. Bought this car from a member of this forum, it was a built Greddy TT/ Shep Stage 1 car putting down near 800hp. Got this car and immediately had Tony at T1 do his magic on this car. Long story short, change the fuel system, put it on e85, made around...
  15. R35 GT-R
    We recently had the opportunity to complete a full GT1R Series 4 project-build on a 2010 GTR for one of our customers, Joe Z from New York, whose main goals were to make big power while retaining excellent drivability and reliability (with an emphasis on power). We thoroughly enjoyed working...
1-15 of 17 Results
Top