Nissan GT-R Forum banner
t1 race development
1-18 of 21 Results
  1. R35 GT-R
    Leading the path to big horsepower from the VR38, we've found many parts that aren't up to the task of reliably delivering performance beyond Nissans original benchmarks. Upon a resent teardown we noticed some abnormal fretting of the flywheel in the areas where it mounts to the crankshaft. This...
  2. Engine & Transmission
    *SOLD* For Sale - Brand new T1 Race Development GR6 transmission brace kit Details - New, never used Reason for Selling - sold vehicle Shipping - Local pick up or Shipping to Continental US only Price - $450 SHIPPED Payment - Paypal
  3. R35 GT-R
    GT1R VR38 Harmonic Damper The VR38 engine has proven to be an absolute powerhouse of an engine, and for the most part taken very well to upgrades and huge power increases. With those power increases come increased forces and loads on parts. After seeing a couple of crankshafts break in high...
  4. R35 GT-R
    Many of you have already seen the video we put out on this red 2013 GT-R we finished up last week, but I figured a full build thread with pictures would be nice as well. Shawn had this 600-mile car delivered too us a few months back and with a plan in place we already knew this car was going to...
  5. R35 GT-R
    We had the pleasure of delivering this gorgeous white R35 back to Tuan (topend) this weekend after an amazing build. We couldn't be happier to have him as a customer and it was awesome getting to see him get this beast back and race it the same day. The car came to us a while back with a...
  6. Transmission & Drivetrain
    We've had a couple OEM 2/4 shift forks break on us so far, and with the lack of available options, we decided to build our own. These have been in the works for some time now, but they are available and on the shelf now. The cost is $1295. These are made out of 4140 Chromoly, so they're many...
  7. R35 GT-R
    I started a build for a high horsepower car back in July. I contacted many companies speaking to them about having a reinforced block built, turbo kit, and fuel system. I couldn't help but remember that Tony at T1 helped me without any of my business. I decided that if Tony helped me so much...
  8. R35 GT-R
    Hey guys, a little more entertaining video of the brake boost kit in action, this time in Wallace Spearmon's 1200+hp GTR! Updated with Youtube link
  9. R35 GT-R
    Hey guys, appreciate everyone's patience with this. It took a bit but the final product is exactly what I wanted, a clean PNP install with minimal components. Instructions and details below Installation of this kit is very simple and straight forward, but there are a few things you need to...
  10. R35 GT-R
    We recently had the opportunity to complete a full GT1R Series 4 project-build on a 2010 GTR for one of our customers, Joe Z from New York, whose main goals were to make big power while retaining excellent drivability and reliability (with an emphasis on power). We thoroughly enjoyed working...
  11. R35 GT-R
    You can't brake boost on a GTR, right?? Now you can. We tested this at the TI invitational roll race last weekend and our 1200+hp GTR out there lost by a Supra by about 1 car without brake boosting and raced the Supra again and won by 3 cars with brake boosting! You know the drill, getting...
  12. Engine
    We finally got a chance to put together some videos showing the spray pattern and atomization of the Injector Dynamics lineup. Turns out this is much harder to capture on film that it is to see with the naked eye. lol These are not actually in slow motion, the reason you see what you...
  13. R35 GT-R
    Hey guys, we've been pretty quiet lately about our GTR projects but we've been hard at work preparing for TX2K12. I'll be updating this between now and then with more pics and results as two of the big power projects will be on the dyno this week. We've been working for a long time now on our...
  14. R35 GT-R
    I haven't seen anything out there about the new Drive Shaft Shop axle upgrades for the GTR. 1000+hp seems to be more and more common now days and things are breaking, some that you hear of and some that you don't. As the exciting world of launch control control progresses, broken axles and...
  15. R35 GT-R
    Hey guys, I know E85 is very common around here and understandably so. We use it all the time and I run it on both of my personal toys. There are a few things to know and understand to use it without problems though, check this link out. http://www.injectord...holArticle.html
  16. R35 GT-R
    Hey guys, Just wanted to share the details and video from a build we've been working on for a while. This has been a long time coming for Shin, it's great to finally see him enjoying his car after everything he's been through previously. The specs of the build are below. The engine is our T1...
  17. Drag
    After finished up the final touch on my car, I and T1/ID just ran to track to see what she will do. We ended up going to Dallas Raceway at Crandall, TX at around 4:30 pm today. They are only open from 12:30 to Sun set. Once we have arrived there, we didn't have much time to get enough runs as...
  18. R35 GT-R
    Last week Andrew Campell invited us out to T1 Race Development in Rowlett, Texas to witness their T1 SFWD Integra. 1200 + horsepower? Wait, seriously?! I've ALWAYS been a huge fan of the aftermarket tuning industry since waaaaay before it went mainstream (*cough* The Fast and The Furious).
1-18 of 21 Results
Top