Nissan GT-R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. AccessTUNER
    Question for those that switch from SD to MAF in order to get the car to perform readiness -- Initially thought everything was going well, uninstalled AP, disconnected battery, re-installed AP with MAF map, started car & all was well. Left it idling for a minute before jumping in to begin the...
  2. Engine
    Ok so I am FBO plus fully ported intake manifold, also added upper IC piping and Tial QR BOVs (aesthetic I know). Still running MAF but am pushing 20psi. I will eventually be upgrading the turbos and IC though, so the IC piping and BOVs are just one less thing I will need down the road. I was...
  3. WTB
    As title states... WTB Polished Upper Intercooler Pipe for use with OEM setup. Also looking for catback.
  4. Engine
    I've sent logs to John V late last night and I'm sure he will respond pretty quickly - he always does - but I thought I would post something to see if others had similar experience. I swapped my OEM BOV for Tial Q's VTA w/ 11pound springs. I have now noticed my idle is really rich. ltft and...
  5. R35 GT-R
    I've sent logs to John V late last night and I'm sure he will respond pretty quickly - he always does - but I thought I would post something to see if others had similar experience. I swapped my OEM BOV for Tial Q's VTA w/ 11pound springs. I have now noticed my idle is really rich. ltft and...
  6. Engine
    I am going to install HKS BOVs and vent them to atmosphere. Does anyone have a solution to plug the opening for BOV recirculation on the OEM turbo inlet pipe? FYI, I have the 2012 OEM inlet pipes. Not looking to weld but any other solutions/suggestions would be much appreciated. Thanks.
1-6 of 6 Results
Top