Nissan GT-R Forum banner
1 - 1 of 1 Posts

·
Member
Joined
·
468 Posts
Discussion Starter · #1 ·
Boost Logic R35 GT-R Cast 3" Inlets are back in stock and ready to ship!



Our True 3″ Inner Diameter Inlet pipe because this is quite a huge a restriction for the 2009-11 GTR and still a small restriction for the 2012-13 GTR especially if you plan on upgrading the cartridge in your stock turbochargers. The 2 Bolt side has a larger inner for future turbo upgrades but still retains the stock 2 bolt dimensions. This still retains the crank case hook up. It also still allows you to recirculate your blow off valves if you so choose.
Features:
  • 3″ Inner Diameter Inlet pipe
  • 2 Bolt side has a larger inner for future turbo upgrades but still retains the stock 2 bolt dimensions
  • This will require a 3.25″ to x" silicone reducer pending your intake pipe size

http://www.boostlogic.com/product/part-02011106/
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top