[droptopp]

You got weights on these with the brackets ?

 

[mr inkredibul]

I run Recaro CS Sporters with an AMS Seat bracket on driver side and a Planted Technology bracket on passenger seat to get the heights close as possible. I'm 5 foot 10 inches and 195 pounds. The OEM Black edition seats aren't wide enough for my shoulders and back and make me feel pinched on the back rest part of the factory seat. The CS Sportster is Very Comfortable would recommend them for sure.

_DSC4483 resize.jpg

_DSC4480 resize.jpg

_DSC4481 resize.jpg

Nice look! Where did you get the red inserts? And how much higher is the driver's seat with the AMS bracket than OEM height?

 

[ALKOUT]

I run Recaro CS Sporters with an AMS Seat bracket on driver side and a Planted Technology bracket on passenger seat to get the heights close as possible. I'm 5 foot 10 inches and 195 pounds. The OEM Black edition seats aren't wide enough for my shoulders and back and make me feel pinched on the back rest part of the factory seat. The CS Sportster is Very Comfortable would recommend them for sure.

_DSC4483 resize.jpg

_DSC4480 resize.jpg

_DSC4481 resize.jpg

Very beautiful seats and interior
May I ask what roll cage is this ?

 

[TKT2SPEED]

You got weights on these with the brackets ?

I havent weighed them!!! but my car keeps getting heavier I just upgraded to full ets v band 4 inch exhaust for a certain new turbo kit that should be showing up soon lol! Way heavier than my Old Linney 102

 

[TKT2SPEED]

Nice look! Where did you get the red inserts? And how much higher is the driver's seat with the AMS bracket than OEM height?

Thanks I had the inserts custom done in red perforated alcantara. I was trying to replicate the nismo seats at the time.

The driver ams seat bracket is fine just slightly lower than oem but the passenger side bracket from ams makes the passenger seat sit higher than the driver side.

I found if you use a planted technology bracket just on passenger side they sit even. If you use two planted brackets they will still be uneven height wise.

 

[TKT2SPEED]

Very beautiful seats and interior
May I ask what roll cage is this ?

Thank you ! Its Buscher racing half cage. I had it welded in with Im pretty sure it was fabricated by Rhese fabrication does a lot of high quality roll bars.

 

[mr inkredibul]

Thanks I had the inserts custom done in red perforated alcantara. I was trying to replicate the nismo seats at the time.

The driver ams seat bracket is fine just slightly lower than oem but the passenger side bracket from ams makes the passenger seat sit higher than the driver side.

I found if you use a planted technology bracket just on passenger side they sit even. If you use two planted brackets they will still be uneven height wise.

This is good to know! Thank you.

 

[Godzilla121115]

I run Recaro CS Sporters with an AMS Seat bracket on driver side and a Planted Technology bracket on passenger seat to get the heights close as possible. I'm 5 foot 10 inches and 195 pounds. The OEM Black edition seats aren't wide enough for my shoulders and back and make me feel pinched on the back rest part of the factory seat. The CS Sportster is Very Comfortable would recommend them for sure.

_DSC4483 resize.jpg

_DSC4480 resize.jpg

_DSC4481 resize.jpg

thee seats are looking FIREE!!! LOVE EM

 

[Daddy21]

How much did it run you total?


Sent from my iPhone using Tapatalk

 

[droptopp]

This won’t last ..