Nissan GT-R Forum banner
1 - 10 of 10 Posts

·
MAJJ
ALPHA 9
Joined
·
1,934 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
158 Posts
Replaced my previous Rexpeed K Style with this N-Tune CF w/ Brake Ducts (N100-1001) Nismo Style. Compared to my previous splitter, this sits higher up, and sticks out less.. more on the OEM look side. The splitter does extend a little (under the DRLs), as that's where a Nismo bumper protrudes.. still looks beautiful imho.

50712648543_959511e35b_z.jpg
That looks really good. Are the brake ducts functional and able to have hosing attached to them?
 

·
Alberta Oil & Gas
Joined
·
5,978 Posts
Looks fantastic. I am partial however to the splitters that are more conservative.
 

·
MAJJ
ALPHA 9
Joined
·
1,934 Posts
Discussion Starter · #6 ·

·
MAJJ
ALPHA 9
Joined
·
1,934 Posts
Discussion Starter · #7 ·
What side skirts do you have and how does it match up them? Are your side skirts carbon fiber, hard to tell in the pics.
Rexpeed Z style skirts, carbon fiber. They match up pretty good ... the N Tune is a little darker in color but hardly noticeable.

50421599091_3abf4f9394_z.jpg https://flic.kr/p/2jPzSKn
50466723918_f5d6ea7880_z.jpg https://flic.kr/p/2jTz9MC
Looks fantastic. I am partial however to the splitters that are more conservative.
the splitter is actually more conservative.. compared to my previous Rexpeed K style splitter that stick out more, and closer to the ground (front mid section) .. the photo below is the combo with my previous splitter

50717050368_66984f8d38_z.jpg https://flic.kr/p/2kgG97U
 

·
Alberta Oil & Gas
Joined
·
5,978 Posts
Definitely N tune with the properly moulded air intakes vs Rexpeed “insert” style
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top