Nissan GT-R Forum banner
1 - 20 of 24 Posts

·
Registered
Joined
·
335 Posts

As part of an introduction special, CampioniShop has partnered with MORR to offer these amazing wheels to the GTR market at exclusive and aggressive introductory pricing. The 3 piece collection is built very quickly, 2 to 4 weeks turnaround time and they're ready. We are currently looking for one or two GTRs to partially sponsor a set of these beautiful MORR wheels.

For more information on the wheels:
http://www.campionis...x?cid=47&clev=1

About MORR

MORR Competition Wheels was established in 2005 and has since managed to position itself as an industry leader and innovator in Craftsmanship, Performance, Aesthetics and distinctive innovations. MORR Competition Wheels designs and engineers its own line of ultra-light weight performance wheels for high-end automobiles. Our main product lines, MonoForged and SpunForged are not only designed to improve your vehicle's performance but to equally enhance your vehicle's appearance.

Since its introduction in the market MORR has developed wheels that are tailor-made for every application and designed one-hundred-percent based on direct customer feedback. Every wheel is handcrafted exclusively to each vehicle allowing us to engineer a wheel based on specific diameters, width, offset, back pad thickness, brake clearance, and most important load rating. This company culture helps us to provide key breakthroughs in design and engineering that result in unique ultra-light performance wheels that have since their inception become industry icons.

In 2008, the R&D team at MORR looked into creating a multi-piece wheel program, but was not satisfied with what was being offered at the time. So, in true MORR fashion, the engineering and product development team set out to make a 2pc and 3pc line-up worthy of carrying the MORR name. Their had to be a better option to combine the flexibility of multi-piece wheels with the craftsmanship, engineering, attention to detail, and performance-minded pedigree that is MORR.


MORR MultiForged™ is MORR's answer to a far behind 3pc market that has remained stagnant in many aspects of wheel manufacturing technologies. The MORR MultiForged™ collection is as different as it can get when it comes to 3pc wheels. Assembly of a MultiForged™ wheel takes 3 hours per wheel, the back-pad is engineered with torque-assisted mounting and Anti-Water rain grooves for water retention prevention, to virtually eliminate any and all possible vibration issues that can occur. Furthermore, all MultiForged™ wheels receive a low curing powder corrosion protection coat on both the outside and inside barrels for additional corrosion resistance and cosmetic appearance. Lastly, because of the use of proprietary assembly components and techniques we are able to torque our assembly bolts close to 2.5 times more than the traditional multi-piece wheel providing a structure that is more resistance to loads. Our fasteners are are stronger, lighter, and much more resistant to corrosion when compared to the zinc fasteners most companies use. Titanium Fasteners are also available.

Additionally, MORR uses a proprietary silicone sealant that was co-developed with 3M to seal the inner and outer parts. This sealant is specifically designed for modular wheels making it preferable for heat resistance, temperature changes, corrosion, humidity and more. And every wheel is assembled and torqued by hand for utmost care. Aside from all of these features, the MORR MultiForged™ collection includes standard features that are only offered as "optional" features by most. These standard features include but are not limited to:


  • Race-Prep Precision Machining
  • BackPad Precision Pocketing
  • Side-Spoke Precision Pocketing
  • Powdercoated Inner & Outer Barrels
All of this precise additional machining adds significant manufacturing cost, but dramatically reduces the weight of the wheel, all while maintaining all of our strength and structural integrity criteria when subjected to FEA Analysis, DOT SAE-J2530 testing, and VIA/JWL Testing and registration.

MultiForged™ is a 3PC Concave product line, that unlike anyone else, uses FORGED 6061-T6 inners, outters AND centers - no extruded, cast, or rolled aluminum in 5000 series to be found anywhere. They are custom made to order, in any finish, offset, or width desired from 19" - 22".

Right now, the MultiForged™ collection is available in two introductory styles: the MS8 (7-spoke mesh concave 3PC) and the MS10 (10-spoke radial concave 3PC). Our MultiForged™ collection represents the most elite 3PC product on the market, taking us 3-years to fully develop. Anybody can make a 3PC nowadays, but very few, if any, do it right. MORR does it right - on a complete new level.


MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave)

*Brushed & Cleared Centers w/ Polished Lip and Silver barrels
















MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave)
*Brushed Titanium Centers w/ Brushed Titanium Lips and Gunmetal barrels









MORR MultiForged™ MS10 (10-spoke Radial 3pc Concave)
*Gunmetal Centers w/ Brushed Titanium Lips and Gunmetal barrels







 

·
Registered
Joined
·
335 Posts
Additionally - MORR also offers a R version of the MS series. These are contoured step lip designs for ultimate weight reduction. The spokes are further worked on to reduced weight towards the edge of the wheels in order to improve the moment of inertia.

21" MORR MS10-R (contoured step lip designs)

21x9.5 - 23 lbs
21x11 - 25 lbs

Cut for a Panamera











 

·
Registered
Joined
·
2,324 Posts
Great to see Morr on the Forum and making GTR Wheels! I heard a bit of "insider" information that these wheels where coming soon


I had Morr wheels on my 335i. They were true works of art. Beautiful and lightweight.

What would be the approximate weight of a 20 x 11 MS10R with an 15 offset ? A 20x10 MS10R with a 30 offset?

Can't wait to see a set of these on a GTR.
 

·
Registered
Joined
·
335 Posts
Discussion Starter · #7 ·
Great to see Morr on the Forum and making GTR Wheels! I heard a bit of "insider" information that these wheels where coming soon


I had Morr wheels on my 335i. They were true works of art. Beautiful and lightweight.

What would be the approximate weight of a 20 x 11 MS10R with an 15 offset ? A 20x10 MS10R with a 30 offset?

Can't wait to see a set of these on a GTR.
The 21x9.5 weights around 23 lbs - they expect the 20" to weight around 21 lbs ! These can be spec'ed with titanium fasteners for ultimate rotational inertia reduction.

Yes, these wheels are coming soon on a Panamera - and MORR has new - even more high end - wheels coming soon
 

·
GT1R Flame Thrower Edition
Joined
·
2,177 Posts
I'm curious as to what the sponsorship pricing would be for stock size MS10's in brushed face/chrome or polished lip just like the ones pictured for the Panamera
 

·
Registered
Joined
·
1,640 Posts
Those look fantastic on that M5, can't wait for pics on a GT-R
 

·
Premium Member
Joined
·
3,581 Posts
Nice wheels, I wish the center cap was not so elevated.
 
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top