Nissan GT-R Forum banner
1 - 20 of 46 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter · #1 ·
OK, we know this is way past due but we will finally be getting a cast manifold for our turbo kit from Japan in the next couple of months.
The prototype part will be displayed at the Tokyo Auto Salon next week in the GTR Display aera.

These new manifolds are designed for better follow and the inside diameters are increased compared to our current stainless tubular manifolds.











All the kits will be upgraded to these cast manifold as soon as they are available.
We will also offer a free exchange program to those who has bought our kit from our Authorized Master Tech dealers here in U.S.

Our kit is designed so that the replacement of the manifolds can be done without dropping the engine so most capable shop with proper tools can do the swap.

We will keep you updated as more information comes from Japan.

Please note:
For those who did not purchase the kit from our GReddy Authorized Master tech dealer in US, please contact the dealer where you purchased from.
This program is only offered by GReddy Performance Product, Inc . Trust Japan and other GReddy dealers outside U.S. may not offer the same program.
 

·
Vendor
Joined
·
2,420 Posts
+1, this was way overdue guys.
 

·
GTR Nerd
Joined
·
5,335 Posts
That is great. The durability of cast stainless over a tubular manifold makes this a welcome sight for the GReddy turbo kit owners.
 

·
Registered
Joined
·
7,515 Posts
RIGHT ON! Now the Greddy Kit is practically "flawless".


I noticed there are "posts" for a heat sheild, do you have pics of it?
 

Attachments

·
Registered
Joined
·
148 Posts
Discussion Starter · #7 ·
RIGHT ON! Now the Greddy Kit is practically "flawless".


I noticed there are "posts" for a heat sheild, do you have pics of it?
Thanks celsius,
Yes, those posts are for heat shield. We haven't received any information or images for the heat shield yet. We will try to get more info.
 

·
Registered
Joined
·
741 Posts
Would you offer for purchase and installation for those who bought the kit from non U.S. dealer?
If so, please PM me cost for manifold and installation.

Thanks,
Gregory
 

·
Registered
Joined
·
52 Posts
Dang those runners are MUCH larger than the previous tubular models! Hurry and get them here!
 

·
Registered
Joined
·
556 Posts
the problem my friend is having is that the right side header when put to a ruler it doesnt line up str8 an flat the car is at the dealer an this is the third set they have sent him . he has ship the car all the way from miami to boston mass because he had the drive shaft issue done an he thought the dealer in mass caused them to leak so he ship the car back to boston to find out that its not there fault an now they are charging him for dropping the motor an he said he has paid for overnight shipping for the headers to go back each time they think it something wrong with greddys mold for that side so i just told him greddys answer to the problem is 2 months away lol I DONT WANT TO POST WHAT HE HAD TO SAY ABOUT GREDDY LOL IT WASNT GOOD SOMTHING ON THE LINE OF CRUSH COMPACTED PARTS SENT BACK TO THEM IN A BOX an a call to AMS WOW ! but the time an money he has wrapped up in this is crazy i think i added up close to 4 grand if not more including shipping the car up for $1200 inclosed an to say he cant wait 2 months for the answer the dealer is claiming to lose money with the car on the lift so that mean he has to pay to have the engine dropped again to fix it right when the good product is offerd can you say LOSE LOSE situation damn i feel bad for him he loves his gtr an to think he has a 1000hp heffner twin turbo lambo in the garaged lol i hope greddy can give me something good to tell this man.
 

·
Caretaker of GODZIRA!
Joined
·
2,679 Posts
Whoa! That is Not a good endorsement for these manifolds. Hope Greddy has something to say about this in response.
 

·
Registered
Joined
·
838 Posts
Am looking for these cast iron ones, as the stainless steel is cracking allot with power am making. i PM greddy staff for new cast irons and still waiting for replay.
 
1 - 20 of 46 Posts
Top