Nissan GT-R Forum banner

Serpentine belt part no.

5K views 8 replies 4 participants last post by  ejp2fast 
#1 · (Edited by Moderator)
Is this the correct part no.?

11720-JK20A?.





It says VQ35HR but, I think the length of the belt is same?

I have asked on another topic but, nobody is replying on the part no.



11720-JF00A?
 
See less See more
3
11720-JF00A is the corect part number you will want. Let me know if you have any questions
Thanks,
Eric
11720-JK20A won't fit?? Give me a reason why?

It's not fair to pay three times the amount for the JF00A if the JK20A also fits.

They are exactly the same length and also 7PK.

How long is the length of the belt?

2056mm or 2060mm?
 
I dont know the lenght of the belt, But they do have the same configuration as far as how the belt is ran on the engine. I would guess one of them is longer then the other, or they would have the same part number. As for cost, I show they are with in $.20 for each other.
Yes in the US is .20$ difference

but, here JK20A is 65$ and the JF00A is 160$.

If the JK20A fits it will be another saving for the European gtr owners as the JF00A costs almost over 300% what the JK20A costs.
 
Discussion starter · #8 ·
MSRP on the JF00A is $62.00 and MSRP on the JK20A is $61.80

Here is the info from the belts

7PK2056 on the JK20A
7PK2109 on the JF00A

It may be worth a shot if it saves you money. Just not sure if the shorter belt would work.
Many thanks Eric.

Yes in Europe the GTR parts are overtaxed that is why I am trying to work out these savings for a not rip off price. The tensioner will adjust it for 50mm on a 2100mm belt that is 10-15mm in total as the belt will expand also when hot.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top