Nissan GT-R Forum banner
1 - 6 of 6 Posts

· Registered
55 Posts

For Sale: Nissan GTR 2.75" Cobb Intake SF System Stealth Black (7C1100)
Condition: Used (< 2,500 miles)
Reason For Selling: Car Sold
Shipping: USA only
Location: Rogers, Arkansas (72758)
Price: $375+ Shipping + 3% Paypal fee

I'm selling my lightly used set of Cobb 2.75" intakes, also known as their SF intakes. Only used for less than 2,500 miles, all necessary hardware is included, and this kit does not require aftermarket tuning. This kit is compatible with all GTR years (2007-2016) with the VR38DETT V6 twin turbo engine. Save big over new price, this intake system sells for $650 new: http://www.cobbtunin...f-intake-system

I am happy to share my phone number for serious buyers, if communication via telephone or text message is more preferable. I am located in Northwest Arkansas in Rogers (72758), and willing to meet buyers half way within a reasonable traveling distance if needed.

I had this intake coupled with with SBD 90mm resonated midpipe, and it was an awesome combo/improvement for those wanting to keep the stock tune on their car. This mid pipe is also available here for anyone interested: http://www.gtrlife.c...-very-low-miles

The intake sounded very close to this video below (to give potential buyers a better idea):

Description from the manufacturer:

Increased Power
The C.A.R.B certified (2010+ pending) COBB Tuning SF Intake removes a pre-turbo restriction in the stock intake system. Power gains become more pronounced at higher boost pressures. This dyno graph shows the power gain across the rev range at 17 psi simply by installing this intake.

Increased Induction Sound
Enjoy the increased snarl from your engine and hear the turbo spool more clearly with the addition of the COBB Tuning SF Intake system. Turbocharger induction noise and bypass valve venting sound is much more audible using this intake system.

Easy to Install
The COBB Tuning SF Intake was designed to be easy to install without having to modify your car or remove the bumper skin. Installation requires no cutting or trimming or removal of the bumper skin or bumper support and can be completed with simple hand tools. Simply remove the stock airbox and bolt the SF intake into place in just minutes!

No Tuning Needed
The SF Intake for the R35 GT-R has been painstakingly designed to eliminate the need for a specific intake calibration. This intake is 100% compatible with the stock calibration as well as all Off the Shelf Accessport maps.


· Registered
60 Posts
I PM'ed you as well. If deal falls through - I'm ready to send monies.
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.