Nissan GT-R Forum banner
1 - 20 of 40 Posts

·
Registered
Joined
·
675 Posts
Discussion Starter · #1 · (Edited)
Setting up my Thread for my 4th Build Iteration of my 2013 GTR. I've owned her since new. My Love for this car still keeps Growing ! She is a few weeks away from completion at Cicio Performance! Jan Buhler, Nathan and the Team have been incredible!

A New Pic! Powder coating is Done waiting on some Titanium works pieces to finish off the engine bay. Tuning and Break in to Commence with Good Weather
Build Specs Attached as well
Vehicle Hood Car Automotive design Motor vehicle


Build Specs as Follows:
Cicio Performance 4.1L R35 GT-R Short Block
-Cicio Spec Machine Work -Cicio Spec Oiling Modifications
-Cicio Spec Stroker Crankshaft
-Cicio Spec CP Billet Pistons
-Cicio Spec Carrillo Rods
-ARP L19 Main Studs
-Cicio Performance Wet Sump Oiling Upgrade
-ARP 625+ Head Stud Kit
-Cicio Performance GT-R Level 3 CNC Ported Cylinder Head Package
-Cicio Full CNC Porting -GSC Conical Spring & Retainer Kit
-GSC Intake & Exhaust Valves (1mm+ Int / 1mm+ Exh)
-Custom Beryllium Valve Seats
-Cicio Performance Combustion Sealing Rings CNC Installation & Water Sealing Gasket
-GSC Power-Division Billet VR38DETT S3 Camshafts
-Powder Coating All Engine Covers - Satin Black
-Cicio Performance Xenith R Turbo Kit 64mm
-AMS Alpha Performance R35 GT-R Race X Billet Flywheel
-Cicio Performance Custom ARP Hardened Flywheel Bolts
-T1 GT1R CNC Engine Oil Pan & Oil Pickup Adaptor
-T1 GT1R VR38 V2 Billet Pro Harmonic Damper -Billet Steel Construction
-Cicio Performance Large Volume Oil Filter Upgrade Kit
-Cicio Performance R35 Nissan GT-R Oil Catch Can System w/ Line Kit - Large Volume Version
-Cicio Performance HD Oil Cooler
-12 Injector Dynamics ID1700X Injectors
-Fore Triple Pump Single Walboro 450 and Dual 525's
-ETS 6.0" Extreme Race "The Fridge" Intercooler
-Cicio Performance Custom Vanjen Clamped Intercooler Piping Kit with 4" Intakes
-Powder Coating Intercooler Piping, Intakes, & Throttle Bodies - Satin Black
-ETS 4 Inch Full Exhaust V Band system
-Shep Trans Billet Front Differential Housing w/ Wavetrac Front Diff
-Shep Trans Stage 4+ Trans with optional Wavetrac Limited Slip Rear Differential
-PRL Billet Side Diff Cover
-Dodson FWD Clutch Upgrade
-DSS Pro Level Rear Axles
-Cicio Performance Drilled Axle Bolts Grade 12.9 safety Wired
-MoTeC M150 Engine ECU Kit Tuned by Taylor @ Cicio Performance
 
  • Like
Reactions: topendusa

·
Alberta Oil & Gas
Joined
·
5,961 Posts
Ditto!
 
  • Like
Reactions: TKT2SPEED

·
Registered
Joined
·
10,117 Posts
Sounds like fun !!
 

·
Registered
Joined
·
10,117 Posts
Fun stuff, let’s see some street action when it’s done.
 
  • Like
Reactions: TKT2SPEED

·
Registered
Joined
·
675 Posts
Discussion Starter · #12 ·
Wish I can get my hands on that Litchfield rear bumper vent, I messaged them but always no replies.
Thanks I like the look even more than the Nismo bumper….it took me a year and half of consistent emailing the parts manager every couple months. He told me No at least three times… I had to take full responsibility for any damage in shipping as well. They have had a few bad cases with them getting broken in shipping so they won’t ship them anymore. Took a fair bit of work to modify the 17 rear bumper to make it fit well but it came out awesome.
 
  • Like
Reactions: archan

·
Registered
Joined
·
675 Posts
Discussion Starter · #13 ·
Fun stuff, let’s see some street action when it’s done.
Will do for sure !!!! I’m hoping she has some really good 60 to 130 action in her :)
My old set up was the elite plus turbos ,street 3.8 my best 60’to 130’ prepped track was 3.5.
 

·
Registered
Joined
·
675 Posts
Discussion Starter · #15 ·
Here are some of the latest pics a few weeks back from the build. These are mostly of Cicio Shop fabricating the custom 4 inch intakes , Short route custom intercooler piping all with Vibrant HD Clamps, ETS Fridge Intercooler as well.
Powder coating will be next!
Hope you like !
Vehicle Car Motor vehicle Hood Light

Hood Motor vehicle Automotive design Car Vehicle

Hood Automotive tire Automotive design Motor vehicle Wheel

Automotive tire Automotive lighting Motor vehicle Motorcycle Tire

Product Automotive exterior Audio equipment Font Gas
 
  • Like
Reactions: archan

·
Registered
Joined
·
675 Posts
Discussion Starter · #17 · (Edited)
Sweet! Jelly! What's the powder coat plan if I may ask?
I guess I’m pretty boring and conservative. I’m going with satin black for all the charge pipes. We have some titanium works pieces will be adding to spice up the engine a bit as well.
 
  • Like
Reactions: gtrbillet
1 - 20 of 40 Posts
Top