Nissan GT-R Forum banner
1 - 18 of 18 Posts

·
Registered
Joined
·
664 Posts
I have a few left over parts from my recent motor build. If there is any questions feel free to IM me.

2012 OEM turbo inlet pipes- $250 shipped- SOLD
Bicycle part Nickel Human leg Metal Composite material

Asnu 1050cc injectors 8 hole only used with pump gas and about 3000 miles on them $450 shipped- SOLD
Handwriting Font Coil spring Art Metal

OEM Crank pulley $50 shipped
Handwriting Tire Tread Wheel Automotive tire

AAM inlet pipes $200 shipped- SOLD
Handwriting Automotive exhaust Bicycle part Muffler Exhaust system
Handwriting Tin Automotive exhaust Plumbing Plumbing fixture

AAM Inlets 2 3/4'' diameter with OEM sensor plates $300 shipped- SOLD
Product Drinkware Office supplies Handwriting Automotive design
Handwriting Automotive exhaust Musical instrument Wind instrument Brass instrument

Thanks
 

Attachments

·
Registered
Joined
·
664 Posts
Discussion Starter · #5 ·
To be honest I bought them used and never installed because i ended up going with GTX30 set up so didn't need them anymore. If you have a 09-11 it will be a big jump because those inlets are very restrictive but on a 2012+ it will be a little jump but not huge.
 

·
Registered
Joined
·
20 Posts
Bump and following post

Might be snatching the aam inlets up from you...
Trying to find out how much larger than OEM 2012+ they are because if they're too big that means u have to get new couplers as well
:(

Sent from my SM-N900T using GT-R Life mobile app
 

·
Registered
Joined
·
664 Posts
Discussion Starter · #10 ·
Bump and following post

Might be snatching the aam inlets up from you...
Trying to find out how much larger than OEM 2012+ they are because if they're too big that means u have to get new couplers as well
:(

Sent from my SM-N900T using GT-R Life mobile app
Thanks for the Bump and it I was not able to take an exactl measurement but it looks like they were about 1/4'' larger than the 2012 inlets yeah you probably would have to get a slight larger coupler, unfortunately these are already sold. My buddy has a set he wants me to sell for him so I will put a pic up of those shortly for you.
Thanks
 

·
gta88ws6
Joined
·
832 Posts
Those do not appear to be asnu brand injectors. You certain they are? I may be interested...
 

·
gta88ws6
Joined
·
832 Posts
Plz email me pics of the injectors. Close up of the nozzle, front and top.

Thanks!

[email protected]
 
1 - 18 of 18 Posts
Top