Removal of interior door handle

Wtfitzvi · Feb 26, 2016

So I picked up a set of BE door handles to add a splash of color to the interior of my 15 premium. I managed to get the armrest off the door panel. Removed the door handle trim and removed the 3 10mm bolts and 3 Phillips head screws.

For some reason I can't remove the door handle. I have the bottom fully separated but the top of the handle is still attached. Is there a screw behind the door panel holding it on?

Python · Feb 26, 2016

there is a thread with someone swapping door handles and there must have been like 40 pieces on the floor at least. good luck OP

Wtfitzvi · Feb 26, 2016

I just caught on to that. I was referring to the interior door pull. Just fixed the thread title

dut · Feb 29, 2016

Does this help?

CCLQ7R · Feb 28, 2016

Any update or tips? I'm looking to do this soon too....

Wtfitzvi · Feb 29, 2016

Took the door panel off and there was a small Philips head screw on the backside of the door panel that held in the top of the handle.

dut · Feb 29, 2016

AndyR35 · Feb 29, 2016

Easiest way I found to remove handle was to take entire door card off as I was painting all the horrid silver plastic.

There is a bolt behind the door card light that needs removed. Pop the light cover off and pull out the housing and you will see the bolt. Once that is off with the upper bolts in the doorcard you can then go round the doorcard giving it a firm pull as it will only be held on by the plastic clips.

Sent from my E5823 using GT-R Life mobile app

Removal of interior door handle

Attachments

Our Vendors

Top Contributors this Month

Recommended Communities